topic Re: Nest (Wired) Hello Buzzing Noise/Phantom Movement in Cameras and Doorbells

Nest (Wired) Hello Buzzing Noise/Phantom Movement

aheiser31 — Sun, 28 Nov 2021 17:16:45 GMT

I just installed a nest hello and I'm getting a consistent buzzing noise as well as movement from the chime. It looks like I'm running 16V 10VA transformer and everywhere I read (including the installation instructions) said it was compatible. Everything works great in my eyes, the blue light turned on right away, the doorbell rings as it did before and our side/rear door rings normally as well. I just get this buzzing noise and phantom movement inside the box. As if someone hits the bell but no noise occurs officially.

I haven't put the cover over it yet as the puck doesn't fit in it so I order a new one to see.

Here's a clip of it; https://imgur.com/pjsnwal

Is it my wiring that is messed up or something I'm not seeing? Thanks for your time.

Re: Nest (Wired) Hello Buzzing Noise/Phantom Movement

Brad — Tue, 11 Jan 2022 20:38:35 GMT

Hi there,

I apologize for my late response and thank you for all of your patience while waiting for a reply. I can definitely understand how frustrating your situation must be, but I wanted to make sure that your issue was addressed. Do you still need help with this issue? I know that there's been a delay in response since you posted.

Please let me know if you need further assistance.

Best Regards,

Brad.

Re: Nest (Wired) Hello Buzzing Noise/Phantom Movement

Mc02hi — Wed, 26 Jan 2022 17:36:54 GMT

Hey

I have exact same issue as above. I’m not sure how to address it? There is a constant buzzing emanating from the chime and occasionally the chime rings and there is no one at the door.
Thanks in advance.

Re: Nest (Wired) Hello Buzzing Noise/Phantom Movement

Brad — Wed, 02 Feb 2022 19:10:27 GMT

Hey there,

Sounds like there may be some power issues. I would use a multimeter and check out the levels. Either that, or its malfunctioning and may need to be replaced. If a replacement is how you want to go, fill out this form and support will contact you.

Best regards,

Brad.