https://www.googlenestcommunity.com/t5/Home-Automation/Wakeup-light-stuck-at-3/m-p/572727#M41126 <P>Hi - I have written a very simple automation to wakeup my Nanoleaf Essentials Matter Lightstrip at sunrise using the&nbsp;device.command.LightEffectWake action over 5 min duration.&nbsp; There are two problems.&nbsp; First - it reaches 3% brightness in less than a minute then never increases in brightness past 3% after that.&nbsp; &nbsp;Second - occasionally the strip will start at 3% then briefly dim to 1% before increasing again to 3%.&nbsp; &nbsp;I can manually set the light to brightness setting up to 100% from the Google Home App with no problem.</P><P>In addition to the two problems above is there a way to define the target brightness setting for wakeup in the YAML script?</P><P>thx!</P> Fri, 05 Jan 2024 21:34:38 GMT sparkles77 2024-01-05T21:34:38Z https://www.googlenestcommunity.com/t5/Home-Automation/Wakeup-light-stuck-at-3/m-p/572727#M41126 <P>Hi - I have written a very simple automation to wakeup my Nanoleaf Essentials Matter Lightstrip at sunrise using the&nbsp;device.command.LightEffectWake action over 5 min duration.&nbsp; There are two problems.&nbsp; First - it reaches 3% brightness in less than a minute then never increases in brightness past 3% after that.&nbsp; &nbsp;Second - occasionally the strip will start at 3% then briefly dim to 1% before increasing again to 3%.&nbsp; &nbsp;I can manually set the light to brightness setting up to 100% from the Google Home App with no problem.</P><P>In addition to the two problems above is there a way to define the target brightness setting for wakeup in the YAML script?</P><P>thx!</P> Fri, 05 Jan 2024 21:34:38 GMT https://www.googlenestcommunity.com/t5/Home-Automation/Wakeup-light-stuck-at-3/m-p/572727#M41126 sparkles77 2024-01-05T21:34:38Z