topic Re: Nest Stopped Understanding Combined Commands in Home Automation

Nest Stopped Understanding Combined Commands

sQualie — Sun, 31 Jul 2022 14:44:33 GMT

About a week ago, my 2 Nests have stopped accepting combined commands. For over 2 years I've been telling it to "turn off the kitchen and turn on the bedroom" but it's now telling me it doesn't understand. When I break down the commands, everything works fine, but I can't combine anymore. Tried rebooting both Nests but it's the same. What's going on and how can I fix this?

Re: Nest Stopped Understanding Combined Commands

Jsilvermist — Sun, 31 Jul 2022 15:07:21 GMT

Also noticed this start happening for me 2 days ago, along with the millions of "sorry, something went wrong, try again in a few seconds." (Always the first ask every 5 minutes)

Google Hub not executing 2 commands

Hamzah — Mon, 01 Aug 2022 06:05:11 GMT

Hie all.

Recently Google products have not been able to execute 2 commands at once. It's not just the hubs, even the Assistant on my phone is unable to do this.

I'm wondering if it's just me or is there anyone else?

Re: Google Hub not executing 2 commands

Havinbeers — Wed, 03 Aug 2022 12:04:04 GMT

Having the same problem. I used to be able to run 2 or 3 commands at once. I've noticed over the past week or two, when I try it, it says sorry I don't understand. Have to run multiple single commands.

Re: Nest Stopped Understanding Combined Commands

Muddi — Wed, 03 Aug 2022 15:43:26 GMT

Hey folks,

Thanks for sharing details about this issue here. We are getting similar reported issues like this, and the team would like to gather some additional information to isolate the issue.

Provide the specific Google Home and Nest device that you have together with the firmware version.
Where are you located

It would also be helpful for the team's investigation if you could send feedback using the keywords,"GHT3 Multiple commands not working." For more instructions on how to send feedback via your Google Home/Nest devices, check this out.

Looking forward to your responses and I'll update the thread once I have additional information.

Cheers,

Muddi

Re: Nest Stopped Understanding Combined Commands

sQualie — Wed, 03 Aug 2022 16:30:55 GMT

Hi Muddi,

I'm in Canada, my Google Home Minis are both are model H2C with firmware 299498, but Google even stopped accepting combined commands on my Galaxy S21 running Android 12 with One UI 4.1, - and my #1 combined command was "Turn off the Kitchen and Turn on the Bedroom". I've now set a routine to do this, but I don't get why it suddenly stopped understanding combined commands when it's been doing it flawlessly for 2 years.

Cheers,

sQualie

Re: Google Hub not executing 2 commands

Princesss — Thu, 04 Aug 2022 01:00:38 GMT

Hi everyone,

Thanks for reaching out.

We're sorry to hear about what's happening right now with your Nest speakers. We are getting similar reported issues like this, and the team would like to gather some additional information to isolate the issue. Let's continue working on this thread to further discuss this.

Best,

Princess

Re: Nest Stopped Understanding Combined Commands

Muddi — Thu, 04 Aug 2022 15:06:35 GMT

Hey sQualie,

Understood! Rest assured that the team is looking into this issue at hand, and we'll update this thread once I know more. Please do not forget to send feedback as instructed above to help us further investigate the issue.

Cheers,

Muddi

Re: Nest Stopped Understanding Combined Commands

Muzza — Tue, 09 Aug 2022 03:13:53 GMT

Is there any ETA for this? it is the AND command that no longer gets recognised as the break for the next request. It is at the back end as it’s effecting all Google Assistant devices, hubs, TV’s, phones, etc.

Re: Nest Stopped Understanding Combined Commands

Muzza — Wed, 10 Aug 2022 00:43:24 GMT

Working again today! Thank you. 👍🏻

Re: Nest Stopped Understanding Combined Commands

Princesss — Wed, 10 Aug 2022 06:01:01 GMT

Hi everyone,

@Muzza, thanks for the update. Glad to know that it's already working. Let's continue to monitor its behavior while I keep this thread open for few more days.

@everyone, kindly confirm if it is already working? We'll wait for your response.

Best,

Princess

Re: Nest Stopped Understanding Combined Commands

Princesss — Sat, 13 Aug 2022 06:04:03 GMT

Hi everyone,

We just want to check if you have seen our response on the previous post? Let us know if you have additional questions, otherwise we'll be locking the thread.

Best,

Princess

Re: Nest Stopped Understanding Combined Commands

FibroJedi — Thu, 18 Aug 2022 10:24:02 GMT

I realise this has theoretically been fixed, but I am still having this issue. "turn on the desk lamp and make it incandescent" completes the colour change (which I know when I turn the light on) but not the switching on. So it does the last command.

Should I start my own thread?

Re: Nest Stopped Understanding Combined Commands

Princesss — Thu, 18 Aug 2022 23:29:11 GMT

Hi FibroJedi,

Thanks for the update. If you can try other combined commands, I'd like to check if it is working. Could you please tell us first the exact commands that you're using so we can further isolate the issue?

Keep us posted.

Best,

Princess

Re: Nest Stopped Understanding Combined Commands

FibroJedi — Fri, 19 Aug 2022 10:47:55 GMT

Hey, it worked for the first time in many days this morning, but I would expect it to be erratic again later. These issues tend to recur periodically.

I'll do some random tests and get back to you, it's usually related to turning a light on/off and another command. I'll reply again once I've had chance. Thanks.

Re: Nest Stopped Understanding Combined Commands

Princesss — Fri, 19 Aug 2022 23:59:59 GMT

Hi FibroJedi,

Thanks for getting back to us. I'll keep this thread open for 3 more days and will wait for your update.

Best,

Princess

Re: Nest Stopped Understanding Combined Commands

FibroJedi — Sat, 20 Aug 2022 22:43:56 GMT

I think just close it and I'll open a new one later. The reason is that, sometimes it works and other times it doesn't. The same is also true of Continued Conversation triggering after a command or not. So it's hard to get consistent results to be able to report them. A tad frustrating, but better that than leave a ticket hanging open. Thanks 🙂

Re: Nest Stopped Understanding Combined Commands

Muzza — Mon, 22 Aug 2022 23:50:52 GMT

Sorry to say, it has stopped working again. Same issue, the problem is at the back end as all My Assistant devices have stopped accepting commands with AND in them replying with Sorry I don’t understand. What’s going on guys?

Re: Nest Stopped Understanding Combined Commands

Princesss — Tue, 23 Aug 2022 03:00:41 GMT

Hi everyone,

Thanks for responding.

For those who are still experiencing the same, let's go ahead and perform a complete reset to your Google Nest speakers and set it up again. Let's check if the reset will make any changes on its behavior.

By any chance that its behavior remains the same, kindly get the cast firmware vesion of your Google Nest speaker so we can check further.

To check which firmware version you're on, follow these steps:

Make sure your mobile device or tablet is linked to the same account as your speaker or display.
Open the Google Home app .
Touch and hold your device's tile.
At the top right, tap Settings Device information.
Under "Technical information," find Cast firmware: X.XXX.XXXXX.

Keep us posted.

Best,

Princess

Re: Nest Stopped Understanding Combined Commands

FibroJedi — Tue, 23 Aug 2022 10:20:48 GMT

1. Definitely the same account

5. Firmware: 1.56.299498

(Speaker type: Nest Audio)