topic Re: Latest update 14150.883.859/1.56.514310 broke my mesh network in Nest Wifi

Mesh performance issues with release 14150.883.859

sinnomoar — Thu, 07 May 2026 21:20:46 GMT

I started a new thread because my problems with Nest WiFi release 14150.883.859 are different from those reported in other threads.

I am experiencing horrible latency and jitter (e.g. up to 6 seconds!) and resulting bandwidths measured in Kbps on devices connected to the 3 H2D WiFi points in my mesh, versus consistently low latency (15 to 50 msec pings to 1.1.1.1, std dev 5 msec) for devices connected to my H2D WiFi router. The problem may persist for 10 minutes then disappear for a while, but the WiFi points may as well be bricks, as that would be less frustrating.

All 4 H2D devices have 14150.883.859 installed.

Google needs to either fix this issue or pull this release and repush the prior release. I would revert to a prior release myself but AFAIK that’s not possible.

Latest update 14150.883.859/1.56.514310 broke my mesh network

vaithia — Sat, 25 Apr 2026 20:50:05 GMT

I’ve narrowed the problem to one of the WiFi points updating to the newer version (1.56.514310) but my other WiFi point still stuck in the older well known version (1.56.463275). If I disconnected the WiFi point still stuck in the older version, that prevented the flapping but this means I’m not getting WiFi signals in portions of my home dependent on that WiFi point (which is kind of the main reason why I even bought a mesh system).

i feel once both the WiFi points get updated to the newer version (1.56.514310) this problem will be solved but I’m not sure how to force the update. I brought the WiFi point with older version right next to the router and restarted it a few times and even tried a factory reset but none of those steps is forcing an upgrade

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

Drock619 — Tue, 28 Apr 2026 21:57:03 GMT

I am having the same problem. I tried all the things that have been suggested, and I think it is just a mismatch issue. Is there a fix coming?

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

vaithia — Tue, 28 Apr 2026 22:16:42 GMT

I was able to get my WiFi point to the latest version by keeping that point plugged in right next to the router for a couple of days. Unfortunately though, all the devices being on latest version didn't really fix the problem. Looks like this update is fundamentally broken. My WiFi points are spending at least few hours each day having those dreaded blinking orange rings with no connection to internet. When you sit right next to the router without the effect of the WiFi points, the internet is better so I've been working without my monitors on my laptop from next to the router last couple of days 😞

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

KevinGR — Wed, 29 Apr 2026 04:32:22 GMT

Hi @vaithia,

Thank you for contacting the community. I am sorry to hear about the connectivity issues you’ve experienced following the recent software updates. I understand that after updating your mesh points, the system is displaying orange rings and failing to connect to the internet. I appreciate the troubleshooting you’ve already done, including rebooting the hardware and performing a factory reset. I'm happy to assist you in resolving this.

@Drock619, thank you for jumping in.

To further investigate and resolve this matter, please provide the following information:

Please ensure the power and Ethernet cables are securely connected and not damaged.
Double-check that the cables between your modem and the primary point are properly seated.
Who is your current Internet Service Provider (ISP)?
Could you confirm the exact model of your devices? This article may help you identify them: What Google Nest Wifi device do I have?

I look forward to your reply.

Best regards,

Kevin.

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

Drock619 — Wed, 29 Apr 2026 05:41:45 GMT

The cables are fine. The devices are Nest Wifi Router and Point that came together as a set. My ISP is Verizon. I have tried a factory reset several times and it acts like it is going to work up until the "final bits" then it times out or says it failed.

Multiple Google Wifi points stuck on orange blinking after factory reset (3 out of 5 failed)

Piet_G — Wed, 29 Apr 2026 18:17:35 GMT

Bericht:
Hi all,

I’m running into a strange issue with my Google Wifi (the older round pucks).

Yesterday, I had a fully working mesh setup with 5 points. Everything was stable and functioning normally. I had to reset my network because of provider change.

Since then, 3 out of my 5 Google Wifi points no longer work properly.

Problem:
After a factory reset, the affected units:

briefly show blue light
then switch to a slow blinking orange/white light
and stay stuck in that state indefinitely

They never return to the expected blinking blue setup mode.

What I’ve already tried:

Standard factory reset (10–15 seconds)
Deep reset (holding reset 30–40 seconds, including during power-on)
Waiting 5+ minutes after reset
Testing different power outlet
Swapping power adapters with working units
Resetting devices individually (not all at once)
Keeping the device close to the main router during setup

None of these steps resolved the issue.

Additional context:

These units were all working fine before the reset
Now exactly 3 out of 5 are stuck in this state
The other 2 still function normally

Question:
Is this a known issue where factory reset can cause units to get stuck in a boot loop or firmware state?
Or does this indicate hardware failure (e.g. flash memory issue)?

Any help or insights would be appreciated!

Thanks in advance.

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

vaithia — Wed, 29 Apr 2026 18:18:10 GMT

1. Ethernet cables between router and modem are connected and fine. As I wrote in my latest update "When you sit right next to the router without the effect of the WiFi points, the internet is better"

2. My ISP is AT&T Fiber

3. I have the Nest Wifi router and Wifi points (Model H2D/H2E)

@Drock619

I have tried a factory reset several times and it acts like it is going to work up until the "final bits" then it times out or says it failed.

==> I figured how to solve this problem thanks to this comment from someone else who faced a similar issue:

"The reason that the error causes is due to the bug resulted from multiple devices (I have a lot of smart devices, not sure if you’re same as me) connecting to the Google Mesh Router.

What I did is to change wifi name to a “temporary” wifi name. Now all my smart devices is not connecting to the router so the router can function normally to add the point.

Then you should be able to set it up like new without any issue. Once all points has setup and ready to go, change wifi name back to the one you normally use. All the smart devices now connect back to the router. Done!"

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

vaithia — Wed, 29 Apr 2026 18:22:26 GMT

But be warned - Factory reset is not going to help. The mesh connections are broken after the latest update. The sooner Google will acknowledge and fix that rather than sending us on wild goose chase about connected cables, the better it will be for its customers

Re: Multiple Google Wifi points stuck on orange blinking after factory reset (3 out of 5 failed)

vaithia — Wed, 29 Apr 2026 23:57:35 GMT

It's a broken update.

Search 14150.883.859 and 1.56.514310 in this community

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

iwasnamedjade — Thu, 30 Apr 2026 23:26:01 GMT

Exact same issue here. Quit telling us to do basic trouble shooting when the update is the clear issue. My network was stable as can be until this newest firmware and now my whole house has issues. If this isn't fixed I will be buying another product

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

vaithia — Sat, 02 May 2026 00:14:19 GMT

Ended up getting another product and using my WiFi points as smart speaker. I'm not sure if they stopped caring about customers or if they deliberately reduced the range of their WiFi mesh to sell more WiFi points, regardless their silence is deafening and their refusal to even acknowledge an issue is frustrating!

Re: Multiple Google Wifi points stuck on orange blinking after factory reset (3 out of 5 failed)

AnnaV — Mon, 04 May 2026 00:34:17 GMT

Hi @Piet_G,

Thanks for posting in the community! I understand that after performing a factory reset, 3 of your 5 Google WiFi devices have an orange blinking light, which is not letting you have the mesh structure that you had before. I appreciate the effort you’ve already put into solving this. Help is here!

To better understand this situation, I would like to ask the following questions:

Does the child point broadcast the setup Service Set Identifier (SSID) or network name located at the bottom of the device?
Did you try to set up the points wirelessly or through a wired connection?
Is the child point within the recommended distance from the parent point? The recommended distance is between 20 and 25 feet (6 to 7 meters).
Did you get a message in the Google Home app when you tried to set up the point?
What is your internet service provider?

@vaithia, thank you for jumping into this!

Keep me posted.

Regards,

Anna

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

BrianGS — Wed, 06 May 2026 00:53:57 GMT

Hi @vaithia,

Thanks for your response. I’m happy to hear that the issue was resolved by trying steps from a comment by another person who faced a similar problem.

@Drock619, thanks for this information. To further assist you, can you help us by trying to change the DNS to the one from your internet service provider? To confirm what your Internet Service Provider's DNS is, please contact them, and they will provide it to you. To change it on your Nest Wifi, please follow the steps that you will find in this helpful article: Change your DNS server.

I look forward to your response.

Best regards,

Brian

Re: Latest update 14150.883.859/1.56.514310 broke my mesh network

sinnomoar — Thu, 07 May 2026 21:19:18 GMT

@iwasnamedjade Is/was your issue with WiFi points not coming online, and/or performance drops? I’ve had performance drops on WiFi points but not on the main router, and no full offline symptoms. All devices in the mesh are model H2D with the 14150.883.859 release.

Re: Mesh performance issues with release 14150.883.859

sinnomoar — Thu, 07 May 2026 21:49:36 GMT

@MichaelP any advice or analysis would be welcome! Note that a couple other threads (1, 2) have reported different problems with WiFi points using this software release. Thanks.

Re: Mesh performance issues with release 14150.883.859

MichaelP — Fri, 08 May 2026 15:01:13 GMT

Hello @sinnomoar

I have seen a few of these reports, but I haven't seen any release notes for that firmware version (Google doesn't usually update their release notes page until a significant majority of units have been updated – it's possible they've put a hold on the rollout, but if so, I haven't heard about that, either; if they do that, they usually fix the issue and roll forward with a fixed version instead of rolling back). I will say this "feels" like it could be a memory leak to me, but that's mostly based on having seen things like this before. If it is a memory leak, it may be triggered by a particular set of configuration options. Do you have a guest network configured? Family WiFi? Preferred activities enable? IPv6?

Re: Mesh performance issues with release 14150.883.859

sinnomoar — Sat, 09 May 2026 02:50:13 GMT

Thanks @MichaelP ! I may have worked around the problem with a factory reset and reconnect/update of the H2D WiFi point that was clearly problematic. No performance issues so far, I’ll confirm after a few days.

@MichaelP wrote:
If it is a memory leak, it may be triggered by a particular set of configuration options. Do you have a guest network configured? Family WiFi? Preferred activities enable? IPv6?

In answer to your questions, I do have a guest network configured, but I think the only atypical aspect of my mesh configuration is that I reserve IPs for almost all devices.

FWIW I also note that my AT&T Fiber modem/router, located near the mesh’s base H2D router, continues to broadcast its SSID in spite of my disabling both WiFi bands in its configuration. That WiFi network won’t connect (claims incorrect password), and it’s probably been this way a long time, but I don’t know for certain.

Re: Mesh performance issues with release 14150.883.859

MichaelP — Sat, 09 May 2026 14:31:53 GMT

@sinnomoar

Glad to hear you may have solved this!

I asked a few questions just to try to get a better picture of what combination of things might trigger this for some people and not others. Your AT&T device shouldn't be much of a problem as long as the SSID it is advertising is different from the one your Nest WiFi system is providing.

Re: Mesh performance issues with release 14150.883.859

EduardoN — Sun, 10 May 2026 00:41:23 GMT

Hi there.

Thank you very much for reaching out to the community! I understand the issues you are encountering with your Nest WiFi points constantly disconnecting and showing orange lights, as well as the Google WiFi failing to return to setup mode after a reset. I can see how much frustration this has caused; please rest assured, I am here to help.

For those who have experienced issues following update 14150.883.859 / 1.56.514310, we would appreciate it if you could share your feedback directly through the Google Home app and provide a description of the problem.

For those experiencing the issue where Google WiFi fails to return to setup mode (indicated by a slow pulsing blue light) after a reset, please confirm that you have followed the standard factory reset steps. You can verify the correct procedure in this article: Factory reset your Wifi device.

Keep me posted.

Best regards,
Eduardo