topic Re: Nest protect software update: Issues in Nest Protect

Nest protect software update: Issues

slimkrazy — Thu, 20 Oct 2022 19:04:10 GMT

Hi folks,

I believe there was a software update around August for our Nest protects. Since then, the one in the upstairs hallway (called upstairs) has been going off really frequently when our bathroom door is left open for even the slightest amount of time. Even if the steam has visibly cleared. Honestly, this is driving us crazy as it's happening many mornings. Additionally, the heads up warning has stopped working - it's just an instant alarm.

We've just now had two more alarms around an hour after my son had finished his shower in a bathroom with an extractor fan and an open window, opened wide enough for the wind to pull the bathroom door slightly ajar.

I was checking in the app and I see that there was another software update a around the same time that the alarm went off. We're on version 3.4.1.rc1.

Re: Nest protect software update: Issues

aatienza — Fri, 28 Oct 2022 23:32:27 GMT

Hey slimkrazy,

Thanks for reaching out! Let's see what's going on — could you tell us the type of Nest Protect you have (Wired, Battery)? What message are you getting when it alarms? Also, did any other third party devices alarm?

Check out this link to Prevent false smoke alarms.

Thanks,

Archie

Re: Nest protect software update: Issues

slimkrazy — Sat, 29 Oct 2022 07:27:39 GMT

Hey Archie,

When the alarm goes off, the message is something along the lines of : "There's smoke upstairs".

It's a battery operated unit.

We do not have any third party devices.

Apologies, but I didn't make it clear in the post: We've had the alarms in the same place for almost three years - it's only started behaving like this since late August.

Re: Nest protect software update: Issues

EmersonB — Wed, 02 Nov 2022 15:58:23 GMT

Hi folks,

@slimkrazy thanks for getting back to us. To confirm, were you able to see the color of the light from the Nest Protect while it's going off? For troubleshooting, you may reset your Nest Protect to the factory default then check if the issue persists.

I appreciate the help, Archie.

Regards,
Emerson

Re: Nest protect software update: Issues

EmersonB — Sat, 05 Nov 2022 16:07:27 GMT

Hello slimkrazy,

I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any concerns or questions from here, as I would be happy to take a closer look and assist you further.

Thanks,
Emerson

Re: Nest protect software update: Issues

aatienza — Tue, 08 Nov 2022 05:18:52 GMT

Hey there,

Just checking in to make sure that you've seen our responses. Please let me know if you have other questions or concerns as I will be locking this in 24 hours if I won't hear back from you again. Feel free to start a new thread and we'll be happy to help.

I appreciate the help, Emerson.

Thanks,

Archie

Re: Nest protect software update: Issues

slimkrazy — Tue, 08 Nov 2022 11:30:44 GMT

Hey all,

Apologies for the delay.

We've had three alarms this morning with the bathroom door closed, bathroom window open, no visible stream in the hallway.

Unit was flashing red, no heads up.

I am about to attempt the factory reset now.

Re: Nest protect software update: Issues

slimkrazy — Thu, 10 Nov 2022 13:06:01 GMT

Ok, so a factory reset seems to have resolved this. I showered today and left the door open afterwards. Didn't even get the heads up. I will continue to monitor for the next few days until at least we're back at the point where we get a heads up for excessive steam.

Re: Nest protect software update: Issues

EdwardT — Fri, 11 Nov 2022 00:09:56 GMT

Hi slimkrazy,

Thanks for the update. I'm glad to hear that you were able to get it working. Please observe it for now and let us know if anything comes up.

Thanks,

Edward

Re: Nest protect software update: Issues

EdwardT — Mon, 14 Nov 2022 22:47:12 GMT

Hey slimkrazy,

It's me again. I wanted to check back in to see if you have other questions and concerns. Feel free to let me know if you do.

Thanks,

Edward

Re: Nest protect software update: Issues

slimkrazy — Mon, 14 Nov 2022 22:53:37 GMT

Hey Edward,

Outside of the self-checks, we've not heard a peep from the sensor since the factory reset. All looks to be back to normal.

Thanks for your help on this.

Re: Nest protect software update: Issues

EdwardT — Mon, 14 Nov 2022 23:43:15 GMT

Hi slimkrazy,

Awesome — glad to hear everything is back and working as intended. I will be locking this thread in 24 hours. Please feel free to create a new thread should you have some more questions or concerns in the near future and we'll be more than glad to help.

Thanks,

Edward