topic Yale lock and connect device in Security

Yale lock and connect device

PSF — Thu, 07 Apr 2022 03:19:54 GMT

Update finally got everything connected - had to remove thermostat from wifi and app - then reset connect (again), reset lock (again) then setup connect, lock and lastly thermostat in that order otherwise connect got in a loop trying to recognize the thermostat and couldn't get to the lock.

Sticking to my original thought This is a joke - a bad one at that

This is a joke! I haven't had this much trouble connecting a device in years. The connect is on the nest app and the lock has been reset to a factory state and the _____ thing will not recognize the lock. If I hadn't bought the home with the lock already installed and one of the former owners had not taken the bloody connect with them I would buy something else. As it is I'm out the 70 bucks for the connect and at least two hours retrying the sequence.

Re: Yale lock and connect device

Brad — Thu, 12 May 2022 16:25:55 GMT

Hi there,

I apologize for my late response and thank you for all of your patience while waiting for a reply. I definitely understand how frustrating your situation must be, and I wanted to make sure that your concern was acknowledged. Do you still need help with this issue?

Best Regards,

Brad.

Re: Yale lock and connect device

Brad — Mon, 16 May 2022 16:15:11 GMT

Hi there,

Just checking in to see if you still need assistance with this issue. Please let me know if you need further assistance.

Best Regards,

Brad.

Re: Yale lock and connect device

Brad — Thu, 19 May 2022 16:19:18 GMT

Hi there,

Just checking in to see if you still need assistance with this issue. We'll leave this topic open for another 24 hrs in case there are any follow up questions or comments. Please let me know if you need further assistance.

Best regards,

Brad

Re: Yale lock and connect device

Brad — Fri, 20 May 2022 16:36:13 GMT

Hey Folks.

At this time, I'll go ahead and lock this thread. If you're still experiencing problems, feel free to start a new thread and we'll be happy to help.

Best Regards,

Brad.