topic Nest x Yale set up flow keeps asking me to set up Connect in Security

Yale lock with Nest Connect

Jackie_Shao — Tue, 01 Oct 2024 19:29:55 GMT

I tried to install Yale lock for my new home. I installed one yale lock in my current home in Nest app.

Now I add an new home in app and successful install the new nest connect, but when I tried to add new Yale lock, app can not connect to nest connect, then show error. I had reset several time for both Yale lock and Nest connect and I have only one wifi. I don't what's the issue.

Re: Yale lock with Nest Connect

kpcrane25 — Wed, 02 Oct 2024 22:48:36 GMT

This is happening with me too. Every time I try to add the lock, it asks me to install the nest connect (which i already have and which shows as connected) but when i try to connect the lock to nest connect, it provides error T030

Nest x Yale set up flow keeps asking me to set up Connect

kpcrane25 — Wed, 02 Oct 2024 22:55:00 GMT

When I go through the nest x Yale setup flow, every time I try to add the lock, it asks me to install the nest connect ,which i already have and which shows as connected, but when i try to connect the lock to nest connect, it provides error T030.

I have factory reset and gone through this process multiple times. I have also done this via a 2.4ghz network after resetting since i read that might help. Nothing gets me around error T030.

Re: Yale lock with Nest Connect

Jackie_Shao — Wed, 02 Oct 2024 23:16:01 GMT

Yes. The same issue to me. I doubt nest app do not support 2 homes in 1 account.

Re: Yale lock with Nest Connect

kpcrane25 — Wed, 02 Oct 2024 23:19:57 GMT

I only have 1 account and 1 home 😞

Re: Yale lock with Nest Connect

chaconmorales — Sat, 05 Oct 2024 03:14:47 GMT

Hi folks,

Thanks for reaching out to the Community. I'm sorry to hear your Nest x Yale Lock and Nest Connect won't connect and are not working as expected. But no need to worry, help's here!

I understand that you already followed basic troubleshooting (like reset and restart) to pair you Nest devices, here are some advanced troubleshooting steps that you can check:

Please make sure to review the process to Factory reset the Nest × Yale Lock because it can be the reason why it has issues to get paired.

In addition, please check the following troubleshooting steps if the pairing error code is T030 during the process:

Quit and restart the Nest app or Google Home app.
Restart the phone or tablet.
Make sure the assisting device is awake and within pairing distance (maximum of 2 to 3 meters).
Restart the assisting product (Example: the Nest Connect when pairing a Nest × Yale Lock).
Put the mobile device or tablet on Airplane mode, then turn on Bluetooth and Wi-Fi.
Try a different mobile device or tablet.
Restart the network equipment (router, extender, or modem).
For Nest × Yale Lock only: Verify that the cable from the keypad is seated securely.
For devices that use Thread networks, enable Internet Protocol version 6 (IPv6).
Reset the joining device to defaults.
Try to manually enter the entry key instead of scanning.
Test with a mobile hotspot.
For Nest × Yale Lock only: Remove the batteries from the lock for 60 seconds.
Create a new home structure and try to pair the problematic Nest device.

The maximum number of homes you can have in the Nest app depends on what account you use to sign in.

If you sign in with a Google Account, you can have up to 5 homes in your account.
If you sign in with a Nest account, you can have up to 3 homes.

Please check these good articles to Troubleshoot offline or disconnected Nest Connect, Nest × Yale Lock disconnected or offline, to Troubleshoot connection errors during Nest × Yale Lock setup and to Set up Nest Connect in case it is needed.

Let me know if you need further assistance.

Best regards,

Mario