topic Re: Can't connect to WiFi in Speakers and Displays

Can't connect to WiFi

cdmontgo — Fri, 10 Dec 2021 03:17:18 GMT

I have a 1st gen Google Home that I recently factory reset. After doing so, I attempted to go through the device setup wizard using the Home app on my Pixel 5. It finds the Google Home device, but when it gets to the WiFi connectivity setup, it fails to connect to my open 5GHz network that I am able to select from the list of available networks. This is the same network it was previously connected to prior to the reset.

I tried the following:
* Simply trying again, and again...
* Resetting again
* Getting closer (right next to) the router
* Connecting to a different network

None of which has worked. Can anyone offer suggestions on what I should try next, or is this device just a paperweight now? Even if I could just get it working as a bluetooth speaker, that would be better than nothing.

Thanks for your time/advice!

Re: Can't connect to WiFi

kiltguy2112 — Fri, 10 Dec 2021 14:50:51 GMT

Try rebooting your router, and make sure your phone is on the same 5GHz network when you are doing the setup. You can choose diffrent networks in that drop down, but if the phone is on 2.4 instead of 5 it will not work.

Re: Can't connect to WiFi

Dracais — Sat, 11 Dec 2021 15:46:49 GMT

So I'm having the same problem as OP. But my router uses the same network for both bands. I've restarted the router and it still won't allow me to connect the Home to my network.

Re: Can't connect to WiFi

kiltguy2112 — Sat, 11 Dec 2021 17:15:18 GMT

Log into the router and turn off one of the bands, or rename one or both of them.

Re: Can't connect to WiFi

randyg503 — Thu, 23 Dec 2021 23:16:00 GMT

Experiencing same behavior as user cdmontgo. 'Connection problem during setup, Please check your Wi-Fi network settings. Cancel|Try Again' when attempting to join freshly factory reset v1's on either 2.4 or 5GHz. Linksys MX8500, bridge mode, WPA2/WPA3 Mixed Personal, no band-steering, no other devices having connectivity issues.

Re: Can't connect to WiFi

randyg503 — Sun, 26 Dec 2021 16:58:54 GMT

Resolved by temporarily disabling my firewall rule which blocks requests to off-premise DNS (e.g. Google DNS servers)

Re: Can't connect to WiFi

aholley2 — Fri, 11 Feb 2022 16:46:57 GMT

THANK YOU! I've been trying to fix this for weeks and your comment is the only thing that worked. I made an account just to make this reply.

For CenturyLink users: Advanced Setup -> IPv4 Firewall -> Select checkboxes for DNS -> Apply. Once you confirm it works, you can go back and deselect the checkboxes and apply changes again.

Re: Can't connect to WiFi

randyg503 — Fri, 11 Feb 2022 22:16:43 GMT

Glad to hear this helped you!

Does anyone happen to know the rationale behind the firmware seemingly not honoring non-Google DNS addresses (handed out via DHCP) as this issue appears to reveal?

Re: Can't connect to WiFi

Jake — Tue, 26 Apr 2022 17:59:48 GMT

Hey there,

Thanks for visiting the Community.

Since this thread hasn't had activity in a while, we're going to close it to keep content fresh. We hope you were able to get the help you need, but if the issue persists feel free to create a new thread, and provide as many details as possible so that others can lend a hand.

Best regards,
Jake