White Rodgers Thermal Relay to Nest thermostat

Greena57 — Tue, 23 Nov 2021 19:10:23 GMT

Hello I have electric baseboard heat in my finished basement. There are 2 loads that pass thru a

24A06G-1 white rodgers Thermal Relay. The relay is controlled by a 2 wire thermostat. I was getting the "need a c-wire" error so I bought the power connector but don't know how to connect the C portion of the connector to the relay or my electical panel. any thoughts? there aren't any clear Basically 2 double pole breakers(4 wires come in to the relay and then 2 come out to the thermostat. There are no indications as to where in the relay I can attach the C. There is no board either with screw on connectors. I assume I will be linking via a wire nut that is already in place.

2-Wire Thermostat (R & W) Black w/White stripe and
White to terminal W. Red to
terminal R.
Power Input: Black & Blue
Heat Load 1: Red & L2
Heat Load 2: Black w/Red stripe & L2

https://s3.amazonaws.com/s3.supplyhouse.com/product_files/White%20Rodgers%20-%2024A06G-1%20-%20Install%20Instructions.pdf

Re: White Rodgers Thermal Relay to Nest thermostat

NestUser22 — Wed, 09 Nov 2022 12:26:32 GMT

Hi @Greena57I have exactly the same set up any luck with it so far? If so can you please guide me

topic White Rodgers Thermal Relay to Nest thermostat in Nest Thermostats

White Rodgers Thermal Relay to Nest thermostat

Re: White Rodgers Thermal Relay to Nest thermostat