topic Re: Nest Learning Thermostat - coming home to a very warm house in Nest Thermostats

Nest Learning Thermostat - coming home to a very warm house

DThimsen — Wed, 22 May 2024 02:45:12 GMT

I've used nest thermostats at a vacation home for years and we use the home/away feature on the IOS app without problems. However, we recently installed thermostats at home. They work great so long as we are around the house, and if we use the home/away feature if we leave for a trip. The problem is if we take a day trip and leave the house in "home" mode. For example, we left the house at 8am this morning and returned home at 10pm to a home that was 7 degrees above our normal cool setting.

The first time this happened, I disabled Auto-schedule on all the thermostats, and then setup heat/cool schedules for every day of the week, and set temps for 12pm, 4pm and 8pm. Evidently, the schedule was ignored because I don't see any cooling data until we walked into the house this evening.

Any suggestions on what might be going on and how to disable this "energy saving" feature? I figure I only have a couple more shots at fixing this until my wife demands that we replace the thermostats with something that works.

Also, I do have Google Home on my iPhone which I've never used, but noticed that there are a lot of automation entries in the app. Could this be a problem?

I run the thermostats in "Heat-Cool" mode.

Device Info:

Model Display-3.7
Backplate-5.26
Software 6.2-27

Thanks,

Don

Re: Nest Learning Thermostat - coming home to a very warm house

Janice4th — Wed, 22 May 2024 17:15:52 GMT

I have the same issue. I’ve tried turning all the away features off, but it still ignores me. I live in Florida. I don’t want my house at 90 degrees when I get home. I need to keep the humidity low due to dust mite allergies.

Re: Nest Learning Thermostat - coming home to a very warm house

aperezdeleon — Tue, 28 May 2024 20:54:23 GMT

Hiya folks,

Thanks for reaching out to our community.

To disable the learning features and achieve manual control of your Nest thermostat, follow these steps:

On your thermostat display:

Within Nest Sense, select "Early On" and choose "On Schedule."
Turn off Auto Schedule which is also in the Nest Sense section.

In the Nest app:

Tap Settings.
Select Home/Away Assist.
Choose "What decides if you're home."
Select "Use phone location."
Within this section, turn off every device triggering home mode, such as phones and other Nest products.

For a fresh start and to remove any automatically learned schedules, perform a schedule reset by going to Settings > Reset > Schedule. Doing so will give you a thermostat that you can change manually or through the app.

Let me know how it goes.

Regards,

Angel.

Re: Nest Learning Thermostat - coming home to a very warm house

DThimsen — Tue, 28 May 2024 23:42:51 GMT

Thanks for the information Angel.

Unfortunately, on the Home/Away Assist, I don't have the "What decides if you're home" option. I've seen mention of the option in the forum, and I've examined settings on the thermostat, IOS App and the web interface via a PC browser session. Is this option model specific?

I've got the learning model with what I think is current firmware:

Model Display-3.7
Backplate-5.26
Software 6.2-27

FYI, I used the thermostat Settings>Reset>Schedule as you suggested but it only removed the schedule data and didn't change any of the available options for Home/Away...

I think I need to specify my goal here. I'd like to use thermostats in Home mode to set temperatures according to my schedule for each device. Also, I only want the thermostats to go into Away mode when I manually make the request (via IOS App or PC web interface) - which would then use the ECO settings I have for the entire site. I NEVER want the thermostat(s) to automatically enable Away.

For now, I've disabled Home/Away Assist. If we leave town, I use the ECO button on the app and then pick the option to put all the thermostats in ECO mode (we have 5 thermostats). When we return, I have to manually go to each thermostat and change the mode back to Heat/Cool.

Best Regards,

Don