topic Re: Temp not going down, mainly fan and only a little cold air in Nest Thermostats

Temp not going down, mainly fan and only a little cold air

DaCapitan — Thu, 25 Aug 2022 06:10:14 GMT

Hello,

I have a nest GA02081-US-1 which I've had for several months. It has worked fine, and I have an older version of the nest upstairs.

Starting tonight, around 10:00, I noticed the house was getting hot downstairs. I then begin to try to reconfigure the thermostat, and verified all the wires were correctly connected. I then did a factory reset.

I set the temperature to cool to 76. But no matter what I do, despite it saying cooling, it stays around 81 because it seems only the fan will blow and only minimal cold air from vents.

So I went upstairs and verified that air conditioner is working fine. It is.

What am I missing here? Why is only the fan operating but cold air is barely coming out of the vents, keeping the temperature at 81°?

Nest Thermostat

Re: Temp not going down, mainly fan and only a little cold air

Jake — Tue, 30 Aug 2022 19:19:30 GMT

Hey DaCapitan,

I wanted to follow up and see I could be of any help. I found an article that has some troubleshooting steps. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.

Best regards,
Jake

Re: Temp not going down, mainly fan and only a little cold air

DaCapitan — Tue, 30 Aug 2022 20:28:45 GMT

Hello,

Turns out it was an HVAC issue(no freon due to leak). Thanks!

Re: Temp not going down, mainly fan and only a little cold air

Jeran — Tue, 30 Aug 2022 20:51:24 GMT

Hiya DaCapitan,

I'm glad to hear that you were able to track down the issue! In that case, did you have any other questions or concerns we can address today?

Best regards,

Jeran

Re: Temp not going down, mainly fan and only a little cold air

Princesss — Fri, 02 Sep 2022 23:48:14 GMT

Hi DaCapitan,

Chimin in-- do you have other questions regarding this? Let us know by responding to this, otherwise we'll be locking the thread in 24 hours.

Best,

Princess