topic Re: Nest Learning Thermostat in Nest Thermostats

Nest Learning Thermostat

PatK — Wed, 24 Aug 2022 11:28:57 GMT

I have a Nest Learning Thermostat 3rd Generation bought and installed in April 2020 and working flawlessly since then. I haven't used my heating since around May. Today I noticed a message on the thermostat saying it "Failed to connect wirelessly to the Heat Link". When I checked the Heat Link it has no light, I tried pressing the button as recommended for 20 seconds but there is still no light. I tried power cycling it several times but there is still no light although it is receiving power, there is 240v at the N L terminals.

How and where do I go about obtaining a replacement.

Re: Nest Learning Thermostat

CristianC — Thu, 01 Sep 2022 11:32:28 GMT

Thanks for reaching out. I'll do my best to get this sorted for you as soon as possible.

Here are some helpful troubleshooting steps:

Press the button on the Heat Link and check if you have any lights on it
Check if the circuit breakers and the switches are set to on
Turn them off and then back on
Press on the button again and check for LEDs

Could you also help me with some answers to these questions?

How long has your thermostat been installed for?
Did the issue happen during the installation?
Is there any error on the Nest thermostat display?
Have you had any power cuts recently?
Have you had any work done on your electrical or heating systems recently?
If yes, was the power properly restored at the fuse board after work was done?
How many zones ( thermostats ) are present in the setup?

Regards,
Cristian

Re: Nest Learning Thermostat

AlexD — Sat, 03 Sep 2022 12:27:35 GMT

Hi, I wanted to check in. Do you still need assistance? Make sure to check out my colleagues suggestions and questions. If you need any further assistance, make sure to let me know.

Re: Nest Learning Thermostat

george_t — Mon, 05 Sep 2022 13:52:52 GMT

It's been a while since this thread was last updated so I'll go ahead and lock this thread. If you're still experiencing problems, please feel free to start a new thread and we'll be happy to help.