topic Rh/Rc jumper in Nest Thermostats

Rh/Rc jumper

EJFarley — Mon, 26 Sep 2022 23:48:07 GMT

I just purchased a Nest thermostat model thermostat-1.4 and installed it. My original thermostat used a jumper wire between the Rh and Rc terminals. There was only one power (red) wire coming out of the wall. The instructions for setting up the nest directs not to install a jumper wire.

I connected the one red wire to the R terminal, which activates my AC with no problem. This morning, when turning on the heating, it turns on the fan but not the heat system in the furnace. My question is, how does the internal jumper automatically work or is there anything more I can do to get the “automatic connection”

Re: Rh/Rc jumper

Markjosephp — Wed, 05 Oct 2022 22:25:45 GMT

Hello EJFarley,

I'm sorry if you have to go through this. We'd like you to have a better experience using your new Nest Thermostat to activate both heat and cool. Let's find out more about what happened.

A few questions: do you the picture of your previous thermostat wiring diagram? If possible, could you send us a picture of your previous and current thermostats diagram? Also, what type of Nest Thermostat do you have? Here's a link about jumper wires.

I'll look forward for your response.

Thanks,

Mark

Re: Rh/Rc jumper

EdwardT — Sat, 08 Oct 2022 22:37:41 GMT

Hi EJFarley,

I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.

Thanks,

Edward

Re: Rh/Rc jumper

Jake — Mon, 10 Oct 2022 17:53:47 GMT

Hey there,

I wanted to check in, and let you know that I will be locking the thread in 24 hours.

Best regards,

Jake