topic Re: Carlin ProX70200 Burner - C Wire Adapter Compatibility in Nest Thermostats

Carlin ProX70200 Burner - C Wire Adapter Compatibility

deaton09 — Fri, 10 Mar 2023 14:55:26 GMT

A post recently closed regarding the compatibility of Carlin ProX70200 Oil Burners and Nest Learning Thermostats. @unknownling @Jhonleanmel @Bassphil

I now know that a C Wire is needed, but I have been told that an adapter may work. I've researched the Power Connector, but I still can't tell if it's compatible as the Carlin doesn't have the wires labeled R, W, etc etc. But instead are T1, T2, F1, F2.

Can anyone answer, or have experience with the Power Connector working with this system? I think I'm out of luck. But wanted to check all options before continuing to charge my Nest when it gets low, or replacing it with a lower tech solution.

Re: Carlin ProX70200 Burner - C Wire Adapter Compatibility

listairee — Fri, 10 Mar 2023 17:22:05 GMT

Hello @deaton09,

Thanks for reaching out. Unfortunately, if your system do not have a C terminal, it is best to reach out to a local Nest pro to help out with the installation. They will also be able to tell if your system is compatible with the Nest thermostat.

Hope that helps! 🙂

Re: Carlin ProX70200 Burner - C Wire Adapter Compatibility

Jenelyn_O — Tue, 14 Mar 2023 20:42:49 GMT

Hi there,

Thanks for reaching out — were you able to contact a Nest Pro technician as listairee recommend?

I appreciate your help, @listairee.

Best,

Jenelyn

Re: Carlin ProX70200 Burner - C Wire Adapter Compatibility

EmersonB — Fri, 17 Mar 2023 21:59:58 GMT

Hi everyone,

@deaton09, we wanted to follow up and see if you are still in need of any help. Please let us know if you are still having any concerns or questions from here, as we would be happy to take a closer look and assist you further.

I appreciate the help, listairee and Jenelyn.

Regards,
Emerson

Re: Carlin ProX70200 Burner - C Wire Adapter Compatibility

EmersonB — Sat, 18 Mar 2023 22:41:35 GMT

Hey deaton09,

Just one quick final check in here since activity has slowed down. We'll be locking the thread in the next 24 hours, but if you still need help, we would be happy to keep it open. If there's more we can do, just let us know.

Thanks,
Emerson