topic Re: Nest Thermostat N260 Error in Nest Thermostats

Nest Thermostat N260 Error

vtboy51 — Thu, 30 Mar 2023 21:59:48 GMT

I'm attempting to install a New Nest Thermostat (non E mode and non learning mode) to a 2-wire heat only system. I fully understand the c-wire requirements, so I decided to try the new Nest Power connector instead of fishing a new c-wire. I've got everything up and running, but have an error message on the thermostate, N260. Nest support says my power connected is not installed correctly, causing this error.

I measure 26volts at the thermostat and when I run the power check from the thermostat I get

VIN=27.6

lin=176(w)

PS=W-176

Support says the PS number is 1/2 what it should be, and it represents the current .... Any thougthts??

Re: Nest Thermostat N260 Error

Lcharm17 — Fri, 31 Mar 2023 01:28:13 GMT

Handy Hendry r

Re: Nest Thermostat N260 Error

Jenelyn_O — Tue, 04 Apr 2023 16:24:04 GMT

Hi there,

Thanks for reaching out. I'm sorry for the delay. Could you please share with us the photo on how your Nest Power Connector installed? Also, try to restart your Nest Thermostat by going to Settings then Restart and check if the code will persist.

Best,

Jenelyn

Re: Nest Thermostat N260 Error

Markjosephp — Fri, 07 Apr 2023 17:02:17 GMT

Hello there,

Thanks for the help here, Jenelyn.

@vtboy51, if the thermostat shows the message N260 or N261, it means the thermostat receives low power. These reports are fixable with the proper installation of the Nest Power Connector.

Please check if you installed the power connector at the correct location. If possible, you can share with us a photo of how you installed it.

Regards,

Mark

Re: Nest Thermostat N260 Error

Markjosephp — Sat, 08 Apr 2023 19:28:23 GMT

Hi folks,

I'm checking in to make sure that you've seen our response. Please let us know if you have any additional questions or concerns before we lock this thread in 24 hours.

Regards,

Mark