topic Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler in Nest Thermostats

Nest Learning Thermostat 3 to Lennox CB29M Air Handler

MarkB_748 — Fri, 07 Jul 2023 01:46:09 GMT

Can I connect a Nest Learning Thermostat 3 directly to a Lennox CB29M Air Handler unit with 5-wire? If so, what would the wiring diagram be? If not then how do I connect?

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

Jenelyn_O — Tue, 11 Jul 2023 21:03:17 GMT

Hi MarkB_748,

Thanks for reaching out. I'm sorry for the delay. I'd love to check it for you. Could you please send us the photo of the wires you have on your thermostat? It would help us to check your system compatibility with the Nest Learning Thermostat.

Best,

Jenelyn

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

MarkB_748 — Wed, 12 Jul 2023 01:58:30 GMT

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

MarkB_748 — Wed, 12 Jul 2023 02:01:26 GMT

I have a 24V plug-in converter attached to C & R on the Air Handler at the moment. Is there a specific transformer I should use for the load?

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

Markjosephp — Wed, 12 Jul 2023 02:06:53 GMT

Hello everyone,

I wanted to stop by and see how I could help.

Thanks for looking into this, Jenelyn.

We appreciate the photo, @MarkB_748. The 24 V Common wire would be enough to provide power to the thermostat. To clarify, are you going to install another unit with your existing system? Also, is there a wiring report showing on your thermostat, particularly in the Rc terminal? If so, what's the message code?

I'll look forward to your response.

Regards,
Mark

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

MarkB_748 — Wed, 12 Jul 2023 02:28:00 GMT

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

Markjosephp — Wed, 12 Jul 2023 02:34:07 GMT

Hey there,

Gotcha! Please remove the thermostat display from its base. Remove the Common wire and leave it disconnected before plugging the display back into its base. Then, press and hold the thermostat screen for 10 seconds until it shuts down to refresh.

Note: Turn off the power from your HVAC system at the breaker box first before touching the wire.

Keep me posted.

Best,
Mark

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

MarkB_748 — Wed, 12 Jul 2023 05:16:32 GMT

Done - refreshed. What next? Shows no network connected and low battery.

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

Markjosephp — Wed, 12 Jul 2023 05:24:04 GMT

Hey there, MarkB_748,

Thanks for keeping me in the loop. Now, check its power readout status in the Technical Info settings and inspect for any reports. If the battery level drops to 3.7 volts, try charging it using a micro USB charger for an hour and check for any progress.

Best,
Mark

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

MarkB_748 — Wed, 12 Jul 2023 05:29:39 GMT

I charged it earlier. It is currently showing 3.767V. No C-wire connected. No network connected. Wires connected Y1-G-Rc.

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

MarkB_748 — Wed, 12 Jul 2023 17:28:53 GMT

The Thermostat is now up and running. It turns out the Air Handler Fuse - a dual old style light socket type - was not screwed fully in hence there was no air handler power. The Nest Thermostat was wired correctly as per earlier picture.
Thank you to everyone who contributed.

Re: Nest Learning Thermostat 3 to Lennox CB29M Air Handler

zoeuvre — Wed, 12 Jul 2023 21:10:30 GMT

Hi all,

@MarkB_748, I'm happy to hear that everything has been sorted out. Since we can now consider this one complete, I will be locking this in 24 hours if we don't hear back from you again. Feel free to start a new thread, and we'll be happy to help.

I appreciate all your help here, Jenelyn and Mark.

Cheers,

Zoe