Alexander, Echo V4 zigbee hub

[kingjohn]

Is it possible? Right now I'm using smart life app and have added a zigbee gateway. I then added around 30 zigbee v3 power sockets. These are then used with things like a printer, so can switch the printers power off.

However the smart life servers are not good, or the app, no local control, so if server goes down you can't control anything, power sockets thermostat etc.

So I decided to give the new Alexa v4 device a try, it has a zigbee hub built in, so it arrived today, I put a smart power plug in setup mode and it was found in seconds. Now I can control it with all echo devices.

But how to control with Google home and the nests.

Strangly the Alexa app is saying the sockets I added came from Ealing, I do have that app installed with 1 power switch.

Anyway out of this, only want the alexa hub, so use the amazon servers

Thanks

[kingjohn]

Sockets I had didn't come from Eling or what ever it says above, it came from E we link

[kingjohn]

Sent Alexa echo back, n way will its hub provide google with an output, back to smart life, and the many errors home app has with it

[GarrettDS]

Hey there,
I understand that these issues can be confusing but I definitely wanted to stop by and see how I could help.

Just wanted to double check to see if you were still needing help on this? Would you mind providing some clarity in terms of what you need help with? Also, what troubleshooting steps have you tried?

Please let me know.

Best regards,
Garrett DS
 

[GarrettDS]

Hey there,
Just wanted to jump in here to check to make sure that you saw our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.

Have a great day.
Garrett DS
 

[GarrettDS]

Hey folks,
It looks like we haven't heard back from the OP so I'm going to go ahead and lock the thread. If you have any further questions or concerns, feel free to create a new thread.

Have a great day,
Garrett DS