12-04-2021 04:43 PM
Hello,
I use CCWGT with a Beamer ( BenQ Th585 ) and Logitech z906 5.1 system.
I cannot get 5.1 however I try. I was reading some articles and some say forcing passthrough via Kodi helps.
Is there any suggestions ?
Answered! Go to the Recommended Answer.
12-05-2021 12:58 AM - edited 12-05-2021 01:10 AM
Use a HDMI switch with audio extractor, digital optical and digital coaxial outputs built-in.
This will help you with Dolby Digital and DTS soundtracks.
However you will not be able to enjoy surround sound encoded in Dolby Digital Plus, used by Netflix and other streaming services, because your Logitech sound system can decode only Dolby Digital and DTS.
12-05-2021 12:58 AM - edited 12-05-2021 01:10 AM
Use a HDMI switch with audio extractor, digital optical and digital coaxial outputs built-in.
This will help you with Dolby Digital and DTS soundtracks.
However you will not be able to enjoy surround sound encoded in Dolby Digital Plus, used by Netflix and other streaming services, because your Logitech sound system can decode only Dolby Digital and DTS.
12-09-2021 09:45 AM
Hey there,
Did you have any more questions or need any additional help? If not, I'll go ahead and lock up this thread in 24 hours.
Just checking up,
Jeran
12-10-2021 10:10 AM
Hey there!
We haven't heard back from aditmenon, and it's been a few days, so I'm locking the thread. As always, feel free to make a new thread if you have any more questions or concerns.
Thank you for your help, djtetei!
Best regards,
Jeran