10-10-2021 07:52 AM - edited 10-10-2021 07:53 AM
Only has 2 wires.
Red from wall goes to G
White from wall goes to R and there is a jumper from R to RC.
How to load a photo here...?
11-08-2021 02:28 PM
Hey Jcallesano1,
Sorry for the late reply. I wanted to follow up and ensure you are good to go. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.
Best regards,
Jake
11-11-2021 12:16 PM
Hey Jcallesano1,
I want to ensure you are good to go, and everything is working properly. Please let me know if you are still having trouble, as I will be locking the thread in 24 hours due to inactivity.
Best regards,
Jake
11-11-2021 01:45 PM
I tried replying to the email but obviously that did not go through. It took so long for someone to get back to me I just went out and bought two non programmable large display Honeywell thermostats for my heat only system with a oil Burner.
I only have a two wire system from the boiler to the thermostats
11-16-2021 10:55 AM
Hey Jcallesano1,
I am sorry once again for the late reply. From what has been described, there may be a chance you might not be compatible with Nest. With there only being 2 wires, I would recommend having a Nest Pro come out and take a closer look if you did want to install the Nest. With that being the case, though, I will be locking the thread at this time. If you have any questions from here, please feel free to create a new post.
Best regards,
Jake