HVAC blowing hot air after nest thermostat install

[calebrubel615]

I plugged in the wires into their respective spots on the Nest and it continues to blow hot air when cooling

[calebrubel615]

I put RC to R, Y to Y, W to O/B, G to G, and W2 to W

[calebrubel615]

@Jake I was hoping you could help, I have been searching the thread for other related issues and noticed you were able to help others. Thanks in advance!

[calebrubel615]

@CoolingWizard any help would be appreciated 🙂

[CoolingWizard]

@calebrubel615, you have a Heat Pump and the orange wire to be set up properly. On your nest display go to SETTINGS > EQUIPMENT > CONTINUE > CONTINUE > HEAT PUMP. Then change the reversing valve setting. If the checkmark is on O move to B.  If the check mark is on B, move to O.  Now select DONE, and test your cooling. 

AC Cooling Wizard 

[calebrubel615]

I'll try it out tomorrow and let you know, thanks for the reply!

[Jenelyn_O]

Hi folks,

I appreciate your help, @CoolingWizard.

@calebrubel615, thanks for posting in the Google Nest Community forum. I just want to check if you were able to try the troubleshooting steps that have been provided above. Please let us know how it goes.

Best,

Jenelyn

[zoeuvre]

Hi calebrubel615, 

I want to check and see if you are still in need of any help. Please let me know, as I would be happy to assist and answer any questions you may have.
 

Thanks,

Zoe

[Dan_A]

Hey there,

We haven't heard from you in a while, so we'll be locking this thread if there is no update within 24 hours. If you need assistance or want to discuss topics, feel free to start a new thread.
 

Sincerely,

Dan