I have an R and RC

[chrismbroker]

Current wiringWhere do I place the R and RC wires?  There is NO jumper.  These are the only wires. The compatibility checker said I was good, no C required. 

[Patrick_Caezza · Accepted solution]

The R terminal would connect to the Rh terminal on the Nest and the RC terminal would connect to the Rc terminal on the Nest

[Ryan_G]

Hi chrismbroker,

Thanks for reaching out here in the Google Nest Community.

I'd like to jump in here and check if you've seen Patrick_Caezza's response. You could try the wiring configuration and let us know if you have other questions.

Thanks for your help, Patrick_Caezza.

Best regards,

Ryan

[Ryan_G]

Hey chrismbroker,

I just wanted to follow up and see if you're still in need of help. Please let us know as we would be happy to answer any questions you may have. 

Best regards,

Ryan

[chrismbroker]

Hooked it up as per the solution. Running great. Haven’t checked the ac yet but I expect no trouble 

[Ryan_G]

Hey chrismbroker,

Thanks for the update and letting us know that it is running fine now.

If you have any other questions, let us know by creating a new thread and we'll be glad to assist you.

This thread will now be locked and we thank you for being here in the Google Nest Community.

Best regards,

Ryan