12-15-2022 12:48 PM
Is this compatible?
Furnace is Trane XE 70
AC is Trane XE 800
12-15-2022 12:51 PM
I noticed in the YT video it shows the RC/RH connector
https://www.youtube.com/watch?v=dHKD-9uI24I
but the Nest unit I got has a separate R and C on different sides.
12-15-2022 02:28 PM
My wires G, W, Y, RC bridged with RH.
12-22-2022 04:10 PM
Hi folks,
It's me again. I wanted to check back in to see if you have other questions and concerns. Feel free to let me know if you do.
Thanks,
Edward
12-26-2022 04:52 PM
Hi folks,
I'm just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.
Thanks,
Edward
12-15-2022 03:18 PM
Do not jumper any wires on the Nest .
Put red to R, and match up the rest.
You will need to connect a C common wire. Is there an unused wire in the cable usually there are 5 wires.
Then you also need to connect it at the furnace to C terminal.
12-15-2022 05:25 PM
Did you get this to work on yours I have the same one along with the white rodgers thermostat ?
12-15-2022 06:37 PM
If you are using the Nest with the mirror glass not the learning model you will need a C wire connected to the furnace and the Nest.
The learning thermostat does not require a C wire .
12-19-2022 04:05 PM