02-26-2023 04:23 AM
Hello all!
I've managed to lose one of the T1/T2 terminal screws for the nest base unit (see photo below), can anyone advise the size please? I had to temporarily use a usb supply whilst renovating our hallway and went to reconnect to the permanent wiring but one terminal screw is missing! Hoping I don't have to buy a whole new base unit...! Thanks in advance for any help. Steve
Answered! Go to the Recommended Answer.
02-27-2023 07:05 AM
Hi there @SteveBod! Please see below the measurements:
Screws measurements
3.5 mm in diameter
13 mm in length [including the head]
Phillips Screw Top Fine thread
02-26-2023 09:02 AM
Consider removing the other screw and visit your local hardware store. They can likely find one to match.
02-27-2023 07:05 AM
Hi there @SteveBod! Please see below the measurements:
Screws measurements
3.5 mm in diameter
13 mm in length [including the head]
Phillips Screw Top Fine thread
02-27-2023 12:31 PM
Thank you so much!
02-28-2023 01:19 AM
Thank you for the input @straitshooter , much appreciated. Make sure to let us know if anything else comes up @SteveBod , I will go ahead and close this thread. Also, it would be best to take the other screw out when going to get a replacement, just to have it as a comparison like @straitshooter mentioned.
02-27-2023 01:35 PM
If actually a metric screw ( likely), it’s an M3.5 X 0.60 pitch, length accordingly. The nearest English equivalent would be a number 6-40 (40 being threads per inch), length overall of 1/2” nominally.