Nest 4th Gen Thermostat - Error Code N416

[beyercj]

My thermostat display is showing a System issue with website (g.co/nest/n416).  The website is not valid and the error code n416 doesn't exist on the support page (https://support.google.com/googlenest/answer/9240096?hl=en#zippy=%2Cn-help-codes).  When I look at the wiring menu on the thermostat, it says N416: Electrical issue on W1 wire.  

This thermostat is connected to a gas boiler with 3 zones.  The boiler is working and the house is heating including the zone that this thermostat is connected to.

Anyone have any thoughts on what the issue is? 

[Akacperski]

Following this thread as I just installed my thermostat and it’s showing the same message. We need to figure out if perhaps this is just a technical glitch?

[beyercj]

I restarted the thermostat and the error code has not come back.

[Akacperski]

so you did a hard reset just to confirm? 

[beyercj]

I did a soft restart.  

To restart from the menu, press the display, go to Settings, select Reset, and then choose Restart.

[virnab]

Hi beyercj,

Thanks for reaching out to our community.

I understand that your Nest Learning Thermostat 4th gen was showing the error code N4156. While you couldn't find this code on the support page, you correctly identified from the wiring menu that it pointed to an electrical issue on the W1 wire. I appreciate you letting us know that restarting the thermostat resolved the issue.

Akacperski, I would appreciate it if you could confirm that the inconvenience remains resolved for you. 

If you need further assistance, please feel free to contact us.

Best regards,

Virna

[Jasonkloess]

I just got this same error message. It’s been working fine for months and now isn’t heating.  Nothing has changed, we did a soft restart, still no heat

[Kingstja5on]

I also recently got this message. It seems to correspond with the recent update. 

[MarkT42]

This started happening to me a few days ago. Found this thread and doing a restart fixed the issue initially, but two days later it’s back. As noted in another comment, the thermostat still seems to be working and heating as scheduled. Not sure where to go next.

[Dan2e]

Getting invalid nest codes, originally N420 then N416 after a reset. Wiring hasn't changed and it was up and running for months already without issue. I have an older gen Nest device for the first floor of my home which is heating fine so I know the gas furnace is running. Anyone else having issues with this? I feel like it's a technical issue?

[EduardoN]

Hi @Dan2e,

Thank you very much for contacting this community! I understand that lately you've been receiving error codes like N420 and N416 on your Nest Learning Thermostat (4th gen) after a restart, but you've verified that your previous-generation thermostat works correctly and that the boiler is functional. Don't worry, I'm here to help you!

I'd like to ask you a few questions to confirm some details and provide you with troubleshooting steps:

• Could you send me some photos of the error codes that appear on your thermostat or in the app you use to control it?
• What type of heating, ventilation, and air conditioning (HVAC) system do you have?
• Did you turn the HVAC system off?
• Did you recently turn off any breakers?
• Have you recently experienced a brownout or blackout?
• Do the LED lights blink on the HVAC control board?

Please feel free to share any additional details you think might be relevant.

Best regards,
Eduardo

[Dadster]

I woke up to the same issue this morning, N 420, only code. Unit has been working for months okay, last night was the first night to cycle completely through the heating cycle. Used heat pump during day, cold enough the alt heat turned on. There is nothing on the Google site except this one post. No wiring changes. I have dual fuel system, HP and propane as alt heat. 

[Jasonkloess]

I’ve restarted the thermostat and it’s still showing an error message and not heating. We had an hvac tech come take a look and he said it’s an issue with the thermostat as the hvac works fine if bypassed. No heat and it’s snowing and we paid hundreds for this POS thermostat. Cool cool

[Akacperski]

This issue seems be a tech glitch that Google needs to address with an update.

[MarkT42]

Same issue for me. Code is N416. I restarted the thermostat and the error message went away. Two days later the error message is back. Despite the error code, the thermostat appears to be functioning correctly and heating the space based on the schedule

[Panda_Bears]

Same issue...worked fine, woke up in a freezing house, error code n416. Restarted but nothing. Are we able to uninstall this awful update?

[burntyeti]

I just installed the new Google Nest Thermostats v4 last weekend. Everything went great, until we added the heat to it this weekend. Seems to be an issue across the board. I am receiving this N416 and no heat coming through. I can put on the old Nest Thermostat v2 and I have heat again. What's up Google?

[ChegGary]

having the same issue.  installed last week working fine then today N416 error.  but only on one of the thermostats

[burntyeti]

I will also note, it's only one of the thermostat (upstairs). Downstairs working flawlessly and keeping us warm, for now.

[irate4x4]

• Google nixed support for Gen2 Nest a few weeks ago
• My Gen2 started blowing fuses on the furnace’s control board this week
• Bought & Installed a Gen4 2hr ago
• No Heat, n416 error
• Unit says read https://g.co/nest/n416
• URL is broke
• Software auto updated to v2.3-2
• Did a factory reset
• It maintained v2.3-2

Its going to be in the 20s again tonight.

Bang Up Job Google!

[burntyeti]

Just FYI I tried to put the old v2 back on - Same issue as you @irate4x4. Kicked on the heater to test with the old thermostat, heard a huge pop. I think it blew a fuse in the unit. I was able to troubleshoot and trace the fuse. Looks blown. I am currently headed to the hardware store to fix. I'm hoping to have heat in the next few hours. Yeesh. I don't think it was worth the discount and I'll be billing Google for my time (equivalent to the price of THREE thermostats!).

[burntyeti]

lol

[EduardoN]

Hi everyone!

We greatly value your feedback and appreciate the alert regarding errors N416 and N420. We understand the frustration this may cause and apologize for any inconvenience. To allow our support team to handle your report with the utmost speed and immediately access the necessary information for the investigation, we kindly request that you register the details of your experience on our Contact Us Page. This is the fastest and most direct method to initiate a formal support ticket. Please do not hesitate to use this resource; we are ready to assist you.

Best regards,
Eduardo