cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

Nest Thermostat use with John Guest UFH manifold?

OHG
Community Member

Hi, does anybody know if I can utilise a Nest Thermostat with a John Guest 8 zone wiring manifold ?

Thanks in advance

2 Recommended AnswerS

Bladerunner
Community Member

Apologies, I didn’t read your post correctly. Yes you can. You just need to make sure you have enough room near the manifold for the nest receivers. If not enough space you may have to fit them where you have space. Which will mean additional wiring . 

View Recommended Answer in original post

Jeran
Community Specialist
Community Specialist

Hey OHG,

Did you have any more questions or need any additional help? 

Thank you,
Jeran
 

View Recommended Answer in original post

9 REPLIES 9

Bladerunner
Community Member

Hello, are you trying to control all 8 zones or just one zone with the nest?

OHG
Community Member

I have an 8 pipe manifold but likely only going to use 5 zones. Can I connect a Nest thermostat to control each zone? 

Bladerunner
Community Member

Yes you can. It will mean all 5 zones though trying to be controlled by the one thermostat. Connect the nest to the first zone at the manifold and then link to other zones. 

OHG
Community Member

So I cannot use a Nest Thermostat to control each individual zone? for instance wired Nest Thermostat 1 to zone 1 (e.g. Living room), Nest Themostat 2 to zone 2 (e.g. Kitchen) and so on? 

 

Bladerunner
Community Member

Apologies, I didn’t read your post correctly. Yes you can. You just need to make sure you have enough room near the manifold for the nest receivers. If not enough space you may have to fit them where you have space. Which will mean additional wiring . 

Jeran
Community Specialist
Community Specialist

Hey there OHG,

Just checking up on this thread, did you have any more questions or need any additional help? 

 

Thank you for your help on this, Bladerunner!

Best regards,
Jeran
 

Jeran
Community Specialist
Community Specialist

Hey OHG,

Did you have any more questions or need any additional help? 

Thank you,
Jeran
 

OHG
Community Member

Thanks @Cblade for your help!

Jeran
Community Specialist
Community Specialist

Hey there!

It looks like Bladerunner was able to answer OHGs question, so I'm locking the thread. As always, feel free to make a new thread if you have any more questions or concerns.

Thank you for your help, Bladerunner!

Best regards,
Jeran