10-24-2021 08:37 AM
Nest 3rd Gen not connecting to WiFi all of a sudden and has weird ver 6.2.22. Anyone relate to this?
10-25-2021 07:45 AM
one of my Nest Thermostats shows 6.2-22, too. And that device is the only one that does show three dots in the iOS APP overview instead of the temperature. All other Thermostats are on 6.1-x and there is "no update available".
Perhaps google pulled the 6.2-22 firmware?
10-26-2021 12:39 PM
Have you pursued this with Google? There is some goofy thing here. Why is only that thermostat with that unlisted firmware version?
10-26-2021 08:54 PM - edited 10-26-2021 09:33 PM
Not yet. I will give it some time…perhaps the next update fixes things. The missing temperature in the overview of the app is the only issue I have encountered so far.
11-20-2021 09:20 AM
installing learning thermostat on android phone and the page " choose the number that matches your thermostat's display" will not load. Just keeps circling. Help
11-29-2021 02:25 PM
I had the same problem with my Gen 2 thermostat and 6.2-22. I ran all the interactive trouble shooting techniques. Nothing. The thermostat didn't see any wifi signals and in a resort town I normally see at least 10 of varying strength.
The fix:
I removed the thermostat from my Nest app. Then I reset the thermostat to factory reset. After that was done I did a hard reboot by holding down the bottom of the ring for 10 seconds. Display went black and after about 30 seconds started back up. Once it was done I reinstalled the thermostat back onto my Nest app. I entered the pin I got off the thermostat. Done. It works! I noted that the 6.2-22 version was gone and it reverted to 5.xx (didn't write it down).
I suspect the hard reboot of the thermostat along with removing and reloading on the app did the trick.