Nest compatibility

[Ebking5]

Compatibility checker online says I'm compatible, set up app says it's not.

Wiring I have: RC, R, W, Y, G, C, S1, S2, O/B

[Houptee]

If the Rh and Rc has a jumper you do not use any jumpers on the Nest.

Do you have separate wires going to them?

S1 and S2 are not used on the Nest so those you can ignore they are for a outdoor temp sensor not needed by the Nest.

So if you only have one Red wire you put it on R

then match up W, Y, G, C, and O/B

Tell Nest you have a Heat Pump and I assume you have Aux electric heat coils?

[Ebking5]

I need to tell nest I have a heat pump? Like in the app? It's an electric heat pump. Not sure if it's aux electric heat coils though

[Houptee]

When you hook up the wires and put the Nest on the base it asks what type of heating system you have and it detects the wires etc.

You have to make sure it detects correctly the system you have in the house so make sure it says heat pump with aux heat on W.

[Jake]

Hey there,

Thanks so much for the help Houptee.

I wanted to check in and see if you managed to see Houptee's post. Please let me know if you have any questions from here. I would be happy to assist, and make sure you are good to go.

Best regards,
Jake

[Jake]

Hey there,

I wanted to check in and see if you are still in need of any help. Please let me know, as I would be happy to assist, and answer any questions you may have.

Best regards,
Jake

[Jake]

Hey there,

I wanted to check in, and let you know that I will be locking the thread in 24 hours.

Best regards,

Jake