01-12-2025 02:19 PM
Currently using Emerson thermostat 1F35U.22PR. I couldn’t figure out how to attach a photo of the Emerson wiring connections, but below is how it was wired to Emerson
I had the yellow wire connected toY
I had the green wire connected to G
I had the white wire connected to C
I had the blue wire connected to W/E
and I had the red wire connected to RC
on the new nest base where should these wires be connected as I was having issues with getting the nest thermostat working
I will say the blue wire is stranded. The other ones are solid. Don’t know if it had been pigtailed somewhere in the attic and they just used a different wire along the way. I’ve seen that if stranded wire was used in the compatibility guide then the nest would not work, but it was only one wire so wasn’t sure if that mattered here or not since the other ones are solid. we just bought the house. I noticed there was a couple of wires clipped and pushed back into the wall.
please advise
01-12-2025 11:02 PM
This is how you attach a picture
01-13-2025 04:56 AM