11-03-2021 06:37 AM
Hi,
I would like to replace my Honeywell DT92E with a Nest Thermostat E, but the receiver unit for my current wireless thermostat (BDR91) has more wires than the instructions suggest it should. I have in total 6 wires coming into the unit (two sets of three, 2x blue / brown / earth). Three of these wires are unconnected (two earths, one blue), the remaining three go into the N, L and B ports. There are then further wires directly linking L to L and L to A.
I would like to self install a Thermostat E, but not sure if that's something I can do with my basic level DIY (can wire light / plug but that's about it). Any advice appreciated!
Thanks,
Natasha
01-06-2022 12:36 PM
Hey tasha_208,
Sorry for the late reply. I wanted to follow up and ensure you are good to go. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.
Best regards,
Jake
01-11-2022 10:39 AM
Hey tasha_208,
I want to ensure you are good to go, and everything is working properly. Please let me know if you are still having trouble, as I will be locking the thread in 24 hours due to inactivity.
Best regards,
Jake
01-12-2022 11:35 AM
Hey tasha_208,
It has been a few days since the last reply, and I am going to lock the thread at this time. If you have any questions, please feel free to create a new post.
Best regards,
Jake