What is Nest Aware? Read more
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
Simple set up- three wires. Yellow - marked ‘Signal’Red - marked ‘12v’Black - marked ‘gnd’ Image here
My nest displays that it is heating but the furnace isn’t running. As soon as I turn the nest off and back on again the furnace kicks on immediately. Anyone have ideas as to fix it??
HeyI have an oil furnace(radiators)with an old thermostat I’m trying to change out. When using the app it says my new nest thermostat isn’t compatible.There are two incoming LV wires to old thermostat. The old thermostat also has two wires terminated...
My Nest has been working for years (inherited from prior owner and have been using ourselves for almost a year), and it all of a sudden shut down while we were away. I charged it with the USB and can get it to function normally, but it loses power af...
Hi there my nest shows the temp we choose but it is not triggering the radiators neither is the boiler firing We went away 3 weeks put away mode and now it is not working . We went through all the issues stated and tried it , came on for 10 mins then...
I’ve replaced the batteries numerous times but still getting this error. Also, shouldn’t I be getting power without batteries with the C wire connected? Sure would appreciate some help. Thanks.
attached is my one drive with a couple photos. I’m in a rental, I switched over to a nest Learning thermostat.My issue is when in cooling it’s blowing warm air. I hooked it up exactly how I took it off the wall, Ive gotten frustrated because it also ...
I tried scanning the QR code from my phone to the thermostat and when I started working on the thermostat, it started setting time schedules by the week which I don’t want to do. How do I cancel all that?
I connected the wiring as directed, charged the thermostat (displays a green blinking light), then the thermostat says "please attach the display to its base". Upon doing so the thermostat emits a snamp once seated on the base then blinks yellow and ...
My Heating and cooling system used the following wires G, Y, W, RH. There is also a jumper from RH to RC. I have the themostat wired using connections to Y1, G, R and W1. The RH (red) wire is connected to the R connection. There is a blue wire, but i...
User | Count |
---|---|
17 | |
16 | |
7 | |
6 | |
5 |