With hot water support, Google Home app now offers complete Nest Thermostat cont... Read more
Forum Posts
Selling your home along with a Nest Thermostat?
Are you a homeowner and you are selling your home and leaving your Google Nest Thermostat for the new owner? What do you need to do to make the transfer painless for you and the new owner? First and foremost, DO NOT PERFORM A FACTORY RESET. The Googl...
Troubleshoot setup: Nest Thermostats
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
Nest WiFi and low battery
First problem, no WiFiUsing a learning thermostat for 7 mos. During spring and early summer never used heating or cooling for maybe three months because the weather here didn't require it. About a month ago the Nest dropped WiFi and will not connect....
Wiring old Honeywell to Nest
trying to wire my Nest. The old thermostat only had 4 wires. Green wire in the green slot. Black wire in the white slot. Yellow in the yellow slot, and red in the red slot. On the nest, there is not a tab for a black wire. Which slot does the black w...
Nest thermostat Error E298
I tried to install Nest thermostat and I got an error code: E298 and a low power error asking to install nest power connector, which also gave me a link to order it for free.but after contacting customer support through phone call, it was determined ...
Water radiant heat 2 wires R +W only
I am trying to see is the nest thermostat or E (not learning) is compatible with my system. I have 5 zones so I need thermostats. I have two wires attached to the thermostats. W and R only. These are low voltage.
Resolved! Google Nest
The heatlink for the Google Nest V3 is not starting. When I connect the power supply form the USB connector then I have an orange light.The Google Nest is from 28 december 2019. What can I do? Now it is not working and gives no signal
Checking Nest Thermostat Compatibility
Checking if my stem is compatible with the Nest Thermostat. It won’t let me upload photo, but these are my wires:Y2, Y, G, RC, RH, C, W/E, W2I’m just not sure about the W/E wire. And RC and RH wires have a jumper connecting the two. Thanks!
Setting stage 2 Through Application
My 2 stage Heat Pump unit will remain in stage 1 while cooling between 1-3 degrees. The Time-To-Temp ranges from 15 minutes to 45 minutes (it takes too long at stage 1 to reach temp for the area size). I have to switch the temperature settings to at ...
Critical error code e294 is displayed when your Nest thermostat's wiring should be reconfigured
Follow-up to @BruceB: As you suggested, I did a factory reset, connected all wires, but refrained from telling Google Home about the blue (common) wire, and completed the setup. Works fine!https://www.googlenestcommunity.com/t5/Nest-Thermostats/Nest-...
Heat repeatedly turns itself
I have nothing in my schedule it's completely blank yet I often wake up to my heat running on days when it shouldn't be to a temperature of 68° f. I have no idea what to do I've erased everything from the schedule and it still happens.
Sign In to vote
