Slow speeds through Google Home mesh

[Spikedude]

I’ve been using a Google mesh systems for a few years. We currently have a three node Google home mesh. Lately I’ve been having much slower speeds than the 300 meg I pay for from my ISP. The ISP was here today and replaced the modem. Now, when connected to the modem, I get the appropriate 300+ meg speeds. But I continue to get below 90 meg From my Google Home router. Why? 

[AbigailF]

Hey Spikedude,

Thanks for posting — let's see what's going on. 

Give these steps a try:

• If you're using a modem/router combo, set that to bridge mode to avoid double NAT issues.
• Make sure that there is minimal to no interference (concrete, bulletproof glass, metal, mirror, etc.) and the points are no more than two rooms apart.
• Remove any special characters in your network name and password.
• Turn off IPv6.
• Change your DNS server into 8.8.8.8 on the primary and 8.8.4.4 on the secondary server. Hit the save/ floppy disk icon on the upper right.
• Unplug the power from your Google Wifi devices for 2 minutes.
• If the issue persists, try factory resetting your network. Take note that this will remove all data from your network.

Let us know how it goes.

Best,
Abi

[EmersonB]

Hello everyone,
 
@Spikedude I'm dropping by to ensure that everything is covered here. How's it going with your Google Wifi? Were you able to read the information and check the links that Abi has shared? In case you have an update, you know where to find us.

I appreciate the help, Abi.

Regards,
Emerson

[AbigailF]

Hi Spikedude,

I'm just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.

Thanks,
Abi