cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

Whitelist a server and Open Ports - Help my NordicTrack bike connect

alanhecht
Community Member

Hi - I have a NordicTrack bike and their support suggests I need to whitelist specific servers and open specific ports for my exercise bit to work with Google Wifi:
Ensure the following servers are whitelisted:
google.com
gateway.ifit.com
ifit-wolf.s3-cdn.ifit.com
cdn.ifit.com
app.launchdarkly.com

As well please ensure the following ports are opened:
TCP port: 80 - HTTP
TCP port: 443 - HTTPS
TCP port: 4348 - iFit
UDP port: 4348 - iFit

How do I do this from the Google Home app on my iPhone?  Thanks!

Alan

21 REPLIES 21

olavrb
Platinum Product Expert
Platinum Product Expert

(Assuming this is outbound traffic)

These domains / FQDNs and ports are not blocked by Nest Wifi. If you have UPnP enabled, this should just work out of the box.

Other than that, try to avoid double NAT.

How is your network other than Nest Wifi, what other components and how is everything connected? Do you have any routers or firewalls in front of it?


I don't work for Google.

alanhecht
Community Member

@olavrb Thank you so much for your reply. UPnP is enabled, and I have no other routers or firewalls.  The issue with my NordicTrack exercise bicycle is it has trouble connecting to the wifi and staying connected to the wifi.  They have had me do lots of debugging, hard resetting, etc.  They've blamed my Goole mesh wifi, which I've disabled.  I'm getting a whole new computer from this week, so hopefully the problems go away, but in the meantime their latest suggestion was I make the configuration changes in my original message.  From your reply, I shouldn't have to change anything on Google wifi side, right?

 

Thanks

Alan

olavrb
Platinum Product Expert
Platinum Product Expert

Correct. If those FQDNs/ domains and ports were blocked, it would not work at all.

Sounds like WiFi issues. If ethernet cable is possible, use that. Else, an alternative could be to buy a cheap access point, connect it to Nest Wifi by ethernet cble, and broadcast a 2.4GHz signal only from it.

IMO, this is an issue with your bike, not Nest Wifi. Modern devices should handle how Nest Wifi does Wi-Fi. I'd ask the manufacturer for a firmware update that fixes these Wi-Fi issues, maybe new drivers for the Wi-Fi card is what it takes.

Search "wifi" in this subreddit, you are not alone.


I don't work for Google.

alanhecht
Community Member

Thanks so much for your insight.

Jeff
Community Specialist
Community Specialist

Hey, alanhecht.

It looks like olavrb was able to help you out here, but I wanted to jump in to see if you were all set here or see if there's anything else you needed. Let me know if there's anything more I can do.

Thanks!

alanhecht
Community Member

@Jeff The latest suggestion from iFit was "You can try to split the signal on your network and name it 2 different names so that you can assign the machine to connect to specific WIFI signal.  Sometimes that will require you to contact you ISP provider and they will need to assist you with that.  "  Is there a place to get instructions on how to do this?

Thanks

Alan

olavrb
Platinum Product Expert
Platinum Product Expert

This is not possible on Nest Wifi, 2.4ghz and 5ghz will always have the same name.


I don't work for Google.

EdwardT
Community Specialist
Community Specialist

Hi folks,

 

@Jeff and olvarb, thanks for the help!

 

@alanhecht, just checking in to make sure that you saw olavrb's response. Let us know if you have other questions, and we'd be glad to assist you.

 

Thanks,

Edward

 @EdwardT @olavrb Thank you for reply and follow up.  It sounds like I'll have to get a separate router for my NordicTrack to connect to.  They also suggested that I could use my phone as a hot spot, but the NordicTrack doesn't seem to find my phone.

EdwardT
Community Specialist
Community Specialist

Hi alanhecht,

 

Thanks for the update. Let us know the results once you get a separate router and if you have more questions, we're here to help.

 

Thanks,

Edward

EdwardT
Community Specialist
Community Specialist

Hi alanhecht,

 

It's me again, I wanted to check back in to see if you have other questions and concerns. Feel free to let me know if you do.

 

Thanks,

Edward

EdwardT
Community Specialist
Community Specialist

Hi alanhecht,

 

Just checking in to make sure that you saw our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.

 

Thanks,

Edward

@EdwardT Yes thank you. I'm expecting another router shortly, and will try a separate 2.4G non-mesh network to see if that solves the NordicTrack issue.

EdwardT
Community Specialist
Community Specialist

Hi alanhecht,

 

Thanks for the update! Let us know the results once you get the new router.

 

Thanks,

Edward

EdwardT
Community Specialist
Community Specialist

Hi alanhecht,

 

I'm just checking back in. We're you able to get the new router and test it with your NordickTrack?

 

Thanks,

Edward

EdwardT
Community Specialist
Community Specialist

Hi alanhecht,

 

Just checking in to make sure that you saw our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.

 

Thanks,

Edward

alanhecht
Community Member

@EdwardT i'm expecting a new (old) router to arrive later this week.

Thanks

Alan

EdwardT
Community Specialist
Community Specialist

Hi alanhecht,

 

Thanks for the update. Keep us on the loop once you've tested it out.

 

Thanks,

Edward

alanhecht
Community Member

@EdwardT I've installed and connected my NordicTrack bike to another 2.4 router, and the bike connects fine.  I can't do a final test if the fix works until April 4, when I'm having a new reed switch installed.  But things are looking promising... at least if the bike doesn't work, iFit/NordicTrack will not be able to blame a mesh network!

Thanks

Alan

EdwardT
Community Specialist
Community Specialist

Hi Alan,

 

Thanks for the response. Glad to know that it's working fine right now with your current router. Give us an update once you've tested it with your new switch.

 

Thanks,

Edward

EdwardT
Community Specialist
Community Specialist

Hi folks,

 

Since we have not received any more replies for quite some time, I will lock this thread now. Please feel free to create a new thread should you have some more questions or concerns in the near future and we'll be more than glad to help.

 

Thanks,

Edward