cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

Nest Mini 2

silvialee7
Community Member

1st time set up, always shows error message after enter wifi information

i am pretty sure, i have enabled local network access in my iphone privacy setting, but it keeps showing message "Speaker may be set up but we could not communicate it from your iphone"

I also did factrory set up few times still can't solve the problem.

2 REPLIES 2

David_K
Platinum Product Expert
Platinum Product Expert
Not to worry! Let's try these steps:
  1. Make sure your Google Home or Nest device is within ############ ft (4-6 m) of the Wi-Fi router. If you have a dual band router, try to set up your device on both the 2.4 GHz and 5 GHz bands.

  2. Make sure Wi-Fi, Location Services and Bluetooth are turned ON on your phone or tablet.

  3. Turn OFF mobile/cellular data.

  4. Reboot your router. Most routers just require that you unplug the power source and then plug it back in to reboot.

  5. Reboot your Google Home or Google Nest device.

  6. Make sure you're using the latest version of the Google Home app, by checking your app store for any updates.

  7. Restart the Google Home app.
  • Android: Swipe up from the bottom, hold, then let go. Swipe up on the Google Home app.
  • iPhone/iPad: Swipe up from the bottom, hold, then let go. Swipe up on the Google Home app. On older devices with a home button, double-click the Home button, then swipe up on the Google Home app.
  • Turn Wi-Fi off and on again on your phone or tablet.
  • Reopen the Google Home app.
If none of the steps above help, factory reset the device. Note that this will clear your data from the device and can't be undone. You may also want to try setup using a different phone or tablet if you have one, just to test.

Jake
Community Specialist
Community Specialist

Hey there,

Thanks for visiting the Community.

Since this thread hasn't had activity in a while, we're going to close it to keep content fresh. We hope you were able to get the help you need, but if the issue persists feel free to create a new thread, and provide as many details as possible so that others can lend a hand.

Best regards,
Jake