Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
Hey there, I just added the nest gen3 thermostat, and I used Nest App to pair with the device, all works fine. And I go to google home app, the device does show up, However, when I click into the device, the device page is blank with only a click box...
Nest thermostat will no longer connect to wifi
hello, I just had to replace my router and now cannot connect nest thermostat. What am I not doing? Any help is most appreciated. Thanks.
I have an electric heat pump with auxiliary heat (no gas or other heat source). My heat runs fine, however when I jump the temperature 20 degrees just to see if my auxiliary heat will engage it does not. I had a professional install my heat pump (the...
Trying to confirm I have wired our new 3rd Gen Nest learning thermostat correctly. It is a trane heat pump with six wires and a jumper on the old thermostat.Old thermostat:C: Blue WireO: Orange WireW/E: White wire (with red jumper wire to W2)R: Red W...
My wife and I were both able to control the thermostat via the Nest app loaded onto our iPhones.My wife had to remove and reload her apps and now she is having trouble reconnecting the thermostat to the app.We cannot find any QR code on the thermosta...
This is the reason I do not recommend a Nest thermostat- the temperature randomly changes - which is extremely frustrating. When we are away we have to constantly, at least every hour, reset the temp. We have watched numerous You Tube videos without ...
Got all the way through with setup for the Google Nest Learning Thermostat. Turned power back on. Then - nothing. We have installed two devices like this before. We checked our wiring several times to make sure we had done it correctly. Still nothing...
Hey folks. So I have a 3-zone taco controller, along with 3 nest thermostats. Home has no C wire, only heat (R + W). I used 3 nest power connectors as well, and a 24V transformer as the TACO controller couldn't push enough power. I updated the softwa...
Hello My heatlink has suddenly stopped working - no lights at all but 240v is present at the terminals. Pressing buttons etc has no response.Thermostat shows H72 error I understand that the 3rd generation commonly had a faulty diode and google will r...
