Attempting to replace my Aprilaire 8463 thermostat with a Nest Thermostat. However, the app is telling me my system is not compatible. There was also a jumper connecting the RC and R connections as seen in the bottom photo. Can I make this work or is...
Hi,Why is it not possible to set the hot water schedule to come on at 15 and 45 mins past the hour? It's absolutely nuts! Does anyone at Google Nest actually listen to the feedback.I'm trying to make my home as energy efficient as possible and also s...
I installed a Google nest with out heat pump, everything works when set to cool. When I change the setting to heat or heat/cool the fan will run continuously. The fan is not running at full power but still running. What could the issue be?
Nest gen 3 has worked great until I begin the conversion process to unlink from WWN as directed by Google. Followed all the steps closely and now thermostat registers ambient temperature somewhere between 5 to 15 degrees above actual, it seems to cha...
Received an error message of E103 of the blue wire. Not sure on how to fix this problem. Anyone knows how to go about this?Anytime I called a place for a repair person to come, they tell me they have no idea. TIA
Can’t log on to nest or Google nest need to talk to a customer service person
Hi,After searching, it seems this is a common issue with the heatlink unit. Ours has been installed for three years and has been working fine but after switching on the heating for an hour yesterday, it has stopped working. There's definitely 230v go...
Is it Nest Thermostat compatible for floor convectors, like TKH-13 (https://www.oc-impklima.com/application/files/1615/6777/0931/Floor_convectors_TKH_Lindab-Sept2019_ENG.pdf)?
HI!Could use some assistance. Installing these is not always as easy as expected. I have a multi-zone Taco SR506-ESP switching relay. I have 5 zones, but only need to control 3 zone with new Nest thermostats.I do NOT have the required C wire at each ...
Hello, I’ve just had this installed at my holiday house. How do I make it follow the schedule I’ve set? It’s currently 18:47 on a Saturday and I’ve set the temp at 24 to try and make the system come on (it’s currently 19 there) but it’s staying off. ...
