Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
Hello, I’m searching for help wiring up my new Nest thermostat. I have 6 wires coming off my old Honeywell thermostat. Currently, I am not sure where to put the “Aux/E” wire. I have a heat pump system, and it only uses electricity, no gas, or other f...
Thermostat saying cannot control equipment properly without wire changes.. already checked wires and everything matches. Any help would be greatly appreciated
On my old thermostat the wires in order are rh is jumper wired to tv, red wire is connected rcwhite wire connected to Y1green wire to Gblue wire to Oi went through the install setup and it says to plug the blue wire to *OB my ac isn’t working now.
I just turned the heater on for the first time with my nest thermostat. It’s blowing cool air.
I am trying to check my Nest warranties. New home, 2 were installed. One has a recent display version and the 2nd has a much older display version and acts totally different. But, according to installer, they are the same Nest’s. Since the display ve...
Simple set up- three wires. Yellow - marked ‘Signal’Red - marked ‘12v’Black - marked ‘gnd’ Image here
My nest displays that it is heating but the furnace isn’t running. As soon as I turn the nest off and back on again the furnace kicks on immediately. Anyone have ideas as to fix it??
HeyI have an oil furnace(radiators)with an old thermostat I’m trying to change out. When using the app it says my new nest thermostat isn’t compatible.There are two incoming LV wires to old thermostat. The old thermostat also has two wires terminated...
My Nest has been working for years (inherited from prior owner and have been using ourselves for almost a year), and it all of a sudden shut down while we were away. I charged it with the USB and can get it to function normally, but it loses power af...
I’ve replaced the batteries numerous times but still getting this error. Also, shouldn’t I be getting power without batteries with the C wire connected? Sure would appreciate some help. Thanks.
