Hi Judgemarilyn,
Thanks for posting.
Are you referring to connecting your bulbs to your Google Home/Nest speakers? If yes, you can go ahead and follow these steps:
- Set up your speaker or smart display if you haven’t already.
- Plug in and turn on your LEDVANCE / Sylvania SMART+ light in the same room as your speaker or smart display.
- Open the Google Home app
. Make sure you have the most recent version.
- From Home
tap Add
Set up device
- Choose a home to set up the light in
- Your Google Home app will start scanning for nearby devices that are ready for setup.
- Tap Set up some smart lights.
- Turn on your smart light
- Your Google Home app will scan again.
- Select the light you’d like to set up. Your light may blink when selected.
- Where is this device? Choose a room for your light.
- To create a custom room, tap Add custom room
- To create a custom room, tap Add custom room
- Create a unique name. Type in the name for your light that you will use for voice commands. We recommend a name like reading light or overhead light. For best results, don’t include the room in the light’s name. (When you say the room name in a voice command, your speaker or display controls all the lights in the room.)
- Setting up your smart light. Your light may blink a few times.
- Your light is ready. Tap Done.
- Setup is successful. You can now control your lights with your speaker or display.
Hope this helps.
Best,
Princess
