Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
Hi.I am installing a standard Nest Thermostat and am confused on the wiring. I have the following configuration on the current thermostat and would appreciate direction on how to connect to the Nest Thermostat: Red Wire - connects to RC and RH that a...
I'm new to Nest and am concerned with the operation of eco mode. It is the winter season and I have my thermostat set to heat mode. Eco activates when I leave the house, which is good and the intent of why I purchased this thermostat. When this happe...
Hello,I just bought a “Google Nest Temperature Sensor” and to my surprise is not compatible to “Google Nest Thermostat” (not E or Nest learning whatever), even when in the sensor’s box says “For Google Nest Thermostat”… Either way, is there any tempe...
Ok guy I have been at this for 2 hours now. I am getting a no power error m20 and e257. How can I get past this wiring issue? Lisa
I added a second Neat and thermostat to my home. It setup without issue but it is not in my Neat app. When I try to register it I am asked to enter a 7 digit number from the app setup. When I go into setup the home icon is not as option and all that ...
Recently had some electrical work done. They disconnected my house power re-hooked it up. And now my perfectly functioning nest thermostat is totally malfunctioning. It's reading 15° above actual room temperature and I've tried everything resetting i...
My current Honeywell thermostat only has two wires (Red and White). The google home app tells me that I need to add a nest power connector. I have heating and AC. Will the nest power connector work or will I need to get a professional out to add wiri...
Hi, I currently have a Honeywell thermostat with three wires on it red, white and blue connected to a terminal block with 1,2,3 respectively. I wanted to determine if my system is compatible with a nest thermostat. . Thanks for any help that can be p...
I updated my TP-Link EAP225V3 WiFi access point firmware from 5.1.1 to 5.1.6 and the Gen1 nest thermostat would no longer connect to WiFi (w2 error). All other WiFi devices in the house, total of 14, including a newer nest thermostat and a nest doorb...
https://imgur.com/gallery/1Q9Rn7m
