12-12-2022 11:16 AM
Is it possible to install the floodlight without a ground wire. My house is old and there was no ground for the old floodlight. I changed the junction box from a metal to a pvc type.
12-12-2022 11:24 AM
Much of the older wiring in our house is grounded through metal conduit. When replacing electrical outlets in that case, we've attached the ground wire to the metal junction box and it tests out as a good ground. Since you've replaced your metal junction box with a PVC box, are you able to ground your camera to the metal conduit to which your PVC box is attached? Or could you put the metal junction box back and ground to that?
12-12-2022 12:10 PM
The pole is metal. Seems like based on what you said that would work. I appreciate the reply
12-20-2022 09:46 AM
Hi there,
Just checking in to see how the conversation is going. Please let us know if you have any further questions or concerns. We'll leave this thread open for a little longer for follow-up questions and concerns.
Best regards,
Brad
12-21-2022 09:49 AM
Hi there,
Just checking in on this thread and the activity on it. We'll leave this topic open for another 24 hours in case there are any follow-up questions or comments.
Best regards,
Brad
12-16-2022 11:32 AM
Hi there,
Thank you for all of your help, @MplsCustomer.
I am just checking in on this conversation to see how it's going. Looks like it may have been resolved. Please let me know if you need assistance.
Best regards,
Brad