My nest indoor camera's micro USB port is ALSO faulty

[dagr8bs]

I say ALSO in Subject because... I've searched and searched for an answer and came across a post by JOHN F, community specialist, from 08/2021.

For reference, here is the original post:

Disclaimer: This thread was migrated from our previous version of the Google Nest Community. You can continue to receive updates on your thread issue here or simply ask, browse or more in the new Google Nest Community.

Original poster: Markbee 

I have a nest indoor camera and the micro USB port is extremely tempermental.

I have tried other micro USB leads which I know work fine on other devices and the issue remains. There is quite a lot of "play" with the cable and it seems quite loose.

I am experiencing the same issue with my Nest indoor cam. I have to have the cord at *just the right angle* for it to work. V frustrating. Looking for a fix. Please help!

[janthadeus]

Hi dagr8bs,
 

I’m sorry to hear that. Let’s see what’s going on — could you plug it into a computer then let me know how it goes?

Looking forward to your response.

Thanks,

JT

[aatienza]

Hey there,

I just wanted to follow up to see if you still need our help. Please let us know as we would be happy to answer any questions you may have.

I appreciate the help, JT.

Thanks,
Archie

[dagr8bs]

Hey All,

I will plug the camera into a computer and let you know... once I'm back from a trip next week!

Thank you both,

Brent

[EmersonB]

Hello everyone,

@dagr8bs, we appreciate you getting back to us. Sounds like a plan. Don't hesitate to post here your update.

Thanks for answering, JT and Archie.

Best,
Emerson

[janthadeus]

Hey there,

It's me again. I want to check if you still need help. Don't hesitate to reach back if you do.

Thanks for chiming in, Archie and Emerson.

Thanks,

JT

[janthadeus]

Hi there,

Just checking in to make sure that you've seen our responses. Please let me know if you have other questions or concerns as I will be locking this in 24 hours if I won't hear back from you again. Feel free to start a new thread and we'll be happy to help.

Best,

JT