05-05-2022 07:24 AM
hi i got the cam installed by a electrician went through the step sequences got to the pont turn power back on at the circuit breaker wont allow me to move forward just recycles back through the set up steps again
05-10-2022 11:43 AM
Hi there,
I apologize for my late response and thank you for all of your patience while waiting for a reply. I definitely understand how frustrating your situation must be, and I wanted to make sure that your concern was acknowledged. Do you still need help with this issue?
Best Regards,
Brad.
05-18-2022 08:43 PM
Hi there,
Just wanted to check and make sure that you’ve seen our response. If you have other questions and concerns, feel free to let me know.
Thanks,
Steve
05-20-2022 08:33 AM
Hi there,
Just checking in to see if you still need assistance with this issue. We'll leave this topic open for another 24 hrs in case there are any follow up questions or comments. Please let me know if you need further assistance.
Best regards,
Brad
05-20-2022 09:39 AM
i got to work finally,but i was told the Nest camera with floodlight is not compatible with the Dish Hopper only the 1st Generation are is this true?
05-20-2022 09:45 AM
I honestly do not know what dish hopper is, so I do not know how to answer this question. My assumption is that if you have heard it is not compatible, it is most likely not compatible. I apologize if this is unhelpful, but I do not know anything about Dish Hopper.
-Brad
05-22-2022 10:26 PM
Hi folks,
Do you have any more questions or need any additional help? If not, I'll go ahead and lock up this thread in 24 hours.
Regards,
Steve