Recently bought 3 Philips Hue GU10 lightbulbs.
For lamp 1 I did the following:
- Installed Philips Hue app
- Installed the lightbulb in the Hue App
- Updated the lamp software
- Set " Discoverable" to ON.
- Opened Google Home and
- Pressed add new device.
The Home app discoveres the lightbulb and asked me if I wanted to install a lamp.
Google Home showed the lamp, which I then selected.
- Added the lamp, and it then added it to the selected room in my Home.
So far so good.
- Did the exact same for lamp 2.
- Also fine.
Both lamps worked in the Philips Hue app and in the Google Home app. Voicecontrol also worked.
Then lamp 3:
Repeated the same steps as for lamp 1 and 2.
But after selecting a name and the room to add it to, got a spinner during pairing and after some time a "something went wrong". Tried again. Same result.
Then I removed all lamps from Google home. Also removed them from the Philips Hue app.
Installed the lamps in the Hue app again and reset the lamps in the Hue app to factory defaults.
Set them again to Discoverable.
Started the process from scratch. Google Home still shows the lamps in Google home, so I selected one. Pressed next. Selected a name and room to add it to, but then again get a "Something went wrong" when trying to add the lamp again.
Tried for all 3 but get the same error, even for those lamps that worked before.
Does anyone have the same experience and a possible solution?
