07-12-2023 03:51 PM
07-12-2023 04:03 PM
I think it should be.
Looks like a simple system.
G - Fan control
C - Common wire
R - Power
W - Heat
Y - Cooling
When installing, follow the installation guide and should be fine.
07-12-2023 04:28 PM
Thanks for the response.
I also thought it looked straight forward but the Google Nest site only shows "G,G1" as an option (see image below) when choosing the wiring so I wasn't sure if that applies for my system only having "G" as a wire.
07-19-2023 08:40 PM
Hi there,
I'm dropping by to ensure that everything is covered here. I hope that the information sheds some light on the issue. If you have other questions and concerns, feel free to let me know.
Best,
Edmond
07-20-2023 08:45 PM
Hey there,
Please let me know if you have other questions or concerns as I will be locking this after 24 hours. Feel free to start a new thread and we'll be happy to help.
Thanks,
Edmond
07-16-2023 08:37 PM
Hello MaxB,
Thanks for posting here in the Community. Based on the photos of the wires from your current thermostat, this is a single heating and cooling system. This should be compatible with any type of Nest Thermostat. Check out this link for Nest thermostat compatibility.
The correct wiring configuration for that in the Nest thermostat is:
1. Yellow wire on Y or Y1
2. Red wire on R or RH/RC
3. Green wire on G
4. White wire on W1
Thanks for the help, @RKeen.
Let me know if you have more questions.
Thanks,
Edmond