04-19-2023 05:56 PM
I just purchased a nest in a home built in the 80s, with the HVAC last updated in 2008. I have none of my current wires labeled, but it shows it is a 24v system on the furnace side. The system does have emergency heat as well.
I have red, green, and blue going to my control board as 24v with a white going to the relay on the furnace. My black wire is also tied into this.
Then I have a brown, orange, and yellow going to my AC unit.
What is my wiring configuration here?
04-24-2023 10:59 AM
Hey Dstanford,
I wanted to follow up and see if I could be of any help. I found an article that has more details on how to install your device. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.
Best regards,
Jake
04-27-2023 10:26 AM
Hi Dstanford,
I wanted to check in and see if you are still in need of any help. Please let me know, as I would be happy to assist, and answer any questions you may have.
Best regards,
Jake
04-28-2023 10:25 AM
Hey there,
I wanted to check in with you, and let you know that I will be locking the thread in 24 hours.
Best regards,
Jake