12-05-2021 06:38 AM
I have a pool automated device that can only connect to 2.4ghz band. As I am using the nest wifi it causes all kind of issue with the device since both 5 and 2.4 bands are constantly present. Is there a way to create a 2.4 ghz band only using some connected device like a point of access for example. The device in question is the IAquaLink, known to not work well with mesh set up.
thanks
01-26-2022 03:57 PM
Hey, Nestwifi.
Sorry for the late response here, but I wanted to check in to see if you were still having this issue and to see if you have done any troubleshooting so far. If you still need help, let me know and I'll be happy to work on this with you.
Thanks.
02-04-2022 10:23 AM
Hi, everyone.
Just one quick final check in here since activity has slowed down. We'll be locking the thread in the next 24 hours, but if you still need help, I would be happy to keep it open. If there's more we can do, just let me know.
Thanks.
02-07-2022 11:08 AM
Hi, everyone.
As we haven't had any activity here recently I'm going to go ahead and close the thread. If you have more to add, feel free to start a new discussion.
Thanks