01-03-2023 03:22 PM
Hoping this is the right area for this. Basically I'm having my garage converted to an office etc, but WiFi won't reach that area. So I'm going to have an access point installed. Now, I'd like to have smart devices in there and would be great having it all under the same group on my Home app. Is this something that is doable?
If I've not explained it clearly enough, please let me know what would make it clearer
01-03-2023 06:23 PM - edited 01-03-2023 06:24 PM
Setup your AP with the same SSID and password as our home wifi and you should be good, as long as they are on the same subnet.
01-08-2023 03:26 PM
Hey jamesgraham,
Thanks for reaching out! Kudos to @kiltguy2112 for helping. I can confirm that if you set up your devices on the same network even if you're using an access point it should work together in a group. Just make sure to set up your network with the same name and password.
To learn more about setting up your device, please visit this link.
Hope this helps.
Cheers,
Muddi
01-11-2023 03:32 PM
Hey there,
I wanted to check in and see if you managed to see Muddi's post. Please let me know if you have any questions from here. I would be happy to assist, and make sure you are good to go.
Best regards,
Jake
01-12-2023 12:54 PM
Hey there,
I wanted to check in, and let you know that I will be locking the thread in 24 hours.
Best regards,
Jake