From my experience, The original power source the camera came with only
has enough power to charge the camera, when they’re not permanently
connected. But if you opt to permanently connect it to the camera, they
don’t have enough juice to keep the ca...
Try using a different charger such as this one.
https://a.co/d/fg2kFoKyou might want to play with the voltage a bit. For
my cameras, it works at about 6.3 volts setting.
I also was experiencing the same issue. I figured out that the power
cable is not supplying enough power to the camera. When I used a
different cable that I had from one of my older (Swann) cameras, it
worked perfectly. This is likely because the vol...
