Hi. Thanks for following up. Yes it is solved now. It turned out to be a
settings issue. I have four thermostats, but the hot water was set to
on/off on the wrong thermostat. I had to find out which themostat is
connected to the heath link with hot w...
Hello, thanks for coming back to me. The wiring is checked and I can
confirm that terminal 2 and 5 are receiving power from the terminal L.
The wire colors dont match, which makes it more confusing, but 2 and 5
are bridged. Also the continuity test w...
Thank you very much for the reply. I attached another picture where you
can see where the wires go. I cannot really tell if terminal 3 is
connected to 5. Would it be safe if I just try and swap the wires of
terminal 5 and 6? Or is there a risk that I...
Hello, thanks for your reply. I have checked all the settings and they
seem ok. I still dont get the click when I turn on the water boost. I
took a picture of the wiring as you suggested. Do you see anything wrong
with the wiring ? Thanks for help
Hello, I am facing a similar issue described above where the hot water
does not work. When I boost on/off the hot water on the Nest app, I do
not hear any click coming from the heat link. The motorised valve is not
faulty and if I set it to manual I ...