How do add a room or group devices

[Adiehm]

I have recently add 2 new lights into a bedroom that has never had an google devices. 
First problem is there does not seem to be any way to create a new room.
Second Problem is how do i link these two lights together. 
The two lights (bulbs) are in a single light fitting and I just want to be able to command them as though they were one eg "Bedroom 3 lights on"  

[SmartHomeH-TAGS · Accepted solution]

Adding a Room.

Select any device and go into it's settings and select the current Room it's in  A list of Room name options should appear. Scroll down to see if there's a name you like for new Room. If you don't, go to the bottom and select "Add a Custom room".

Light control 

With the 2 lights in the same Room in the Google Home app and a speaker included in that Room then the command "Turn on lights" from that speaker should turn them on.

I only need to say "Hey Google, Light" to turn mine on or off...

https://youtube.com/shorts/5z69ruHrU3I?feature=share

[SmartHomeH-TAGS · Accepted solution]

Adding a Room.

Select any device and go into it's settings and select the current Room it's in  A list of Room name options should appear. Scroll down to see if there's a name you like for new Room. If you don't, go to the bottom and select "Add a Custom room".

Light control 

With the 2 lights in the same Room in the Google Home app and a speaker included in that Room then the command "Turn on lights" from that speaker should turn them on.

I only need to say "Hey Google, Light" to turn mine on or off...

https://youtube.com/shorts/5z69ruHrU3I?feature=share

[Adiehm · Accepted solution]

none of that is correct - non of what you have said exists for a new device.  But I did figure it out.

I did figure out the new devices had to be added to a Home first, then I was prompted to move the device into an existing room or add a new room within the home. I added a new room for the first light and moved the second light into the same room.

The interface is far from intuitive 

[SmartHomeH-TAGS]

It is correct if they were already in a  Home/Room.

Not being in a Home/Room would mean those "new" devices would have been located in the "Linked to you" section at the bottom of the Devices page.

If I had that bit of information I would have known that they weren't in a Home or Room.

That's like Google Home app 101.